How to Clear Terminal Certificates: Difference between revisions

Revision as of 17:32, 6 January 2024

Prerequisites

Ensure Administrator Login is completed. For engineer mode terminals, login is default.
Have a TF-card ready for use.

Steps to Generate and Verify Token

Insert the TF-card into the Terminal:
- Place the TF-card in the designated slot on the terminal.
Navigate to Certificate Management:
- Go to Settings > About POS > POS Configuration > Certificate Management.
Generate Token:
- Choose Clear Certificates.
- Select the Generate token radio button.
- Click the Confirm button. This action generates a token file in the root path of the TF-card.
- A notification will appear in the notification bar upon completion.
Send Token File to WizarPOS:
- Transfer the token file from the TF-card to your computer.
- Email the token file to WizarPOS for signing.
- WizarPOS will return a signed '.sig' file.
Verify Token:
- Place the '.sig' file on the TF-card, in the same location as the token file.
- Reinsert the TF-card into the terminal.
- Return to 'Certificate Management' and select 'Clear Certificates'.
- Choose the 'Verify token' radio button and click 'Confirm'.
- A notification will appear in the notification bar upon successful verification.
Restart and Confirm Clearance:
- Restart the terminal.
- Navigate to Settings > About POS > POS Configuration > Certificate Management > Certificate List.
- Verify that all certificates have been cleared.

Important Notes

These steps must be performed with administrative privileges.
Ensure that the TF-card is correctly inserted and recognized by the terminal before proceeding with each step.

@@ Line 1: / Line 1: @@
-Note that the following steps are performed only after Administrator Login. If it is an engineer mode terminal, it defaults to login.
+== Prerequisites ==
-# Insert the TF-card.
+* Ensure Administrator Login is completed. For engineer mode terminals, login is default.
-# Click Settings > About POS > POS Configuration > Certificate Management > Clear Certificates, select the generate token radio button, and then click the confirm button to generate the token file in the root path of the TF-card. When finished, there will be a notification in the notification bar.
+* Have a TF-card ready for use.
-# Send the token file to WizarPOS and they will sign the token file and return a. Sig file.
+== Steps to Generate and Verify Token ==
-# Put the. Sig file into the TF-card, the same path as the token file, and insert the TF-card again.
+# '''Insert the TF-card into the Terminal:'''
-# Click Settings > About POS > POS Configuration > Certificate Management > Clear Certificates, select the Vefify token radio button, and then click the confirm button. After the verification is successful, the notification will be displayed in the notification bar.
+#* Place the TF-card in the designated slot on the terminal.
-# Restart the terminal, and then click Settings > About POS > POS Configuration > Certificate Management > Certificate List. You will find that all certificates have been cleared.
+# '''Navigate to Certificate Management:'''
+#* Go to '''Settings > About POS > POS Configuration > Certificate Management'''.
+# '''Generate Token:'''
+#* Choose '''Clear Certificates'''.
+#* Select the '''Generate token''' radio button.
+#* Click the '''Confirm''' button. This action generates a token file in the root path of the TF-card.
+#* A notification will appear in the notification bar upon completion.
+# '''Send Token File to WizarPOS:'''
+#* Transfer the token file from the TF-card to your computer.
+#* Email the token file to WizarPOS for signing.
+#* WizarPOS will return a signed ''''.sig'''' file.
+# '''Verify Token:'''
+#* Place the ''''.sig'''' file on the TF-card, in the same location as the token file.
+#* Reinsert the TF-card into the terminal.
+#* Return to ''''Certificate Management'''' and select ''''Clear Certificates''''.
+#* Choose the ''''Verify token'''' radio button and click ''''Confirm''''.
+#* A notification will appear in the notification bar upon successful verification.
+# '''Restart and Confirm Clearance:'''
+#* Restart the terminal.
+#* Navigate to '''Settings > About POS > POS Configuration > Certificate Management > Certificate List'''.
+#* Verify that all certificates have been cleared.
+== Important Notes ==
+* These steps must be performed with administrative privileges.
+* Ensure that the TF-card is correctly inserted and recognized by the terminal before proceeding with each step.