|
|
(One intermediate revision by one other user not shown) |
Line 1: |
Line 1: |
| This guide provides three methods to disable the portable hotspot feature on your smart POS terminal: through the device's settings menu and using a dedicated application.
| | {{Migrating|https://smartpossdk.gitbook.io/cloudpossdk/faq/sim-ethenet-wifi/disable-pos-hotspot}} |
| == Method 1: Disabling via Settings Menu ==
| |
| * '''Access Settings:''' Tap on the 'Settings' icon on your terminal.
| |
| * '''Navigate to Hotspot Settings:''' Follow this path: More -> Tethering & Portable Hotspot.
| |
| * '''Turn Off the Hotspot:''' Select 'Portable WLAN Hotspot' and toggle it off.
| |
| == Method 2: Disabling via Application ==
| |
| Here is a [http://ftp.wizarpos.com/advanceSDK/CloseHotspot.zip demo] of disabling the portable hotspot on your smart POS terminal using a specific application.
| |
| == Method 3: Disabling via Wizarview ==
| |
| * '''Select Terminal:''' Go to 'Terminals' > 'Terminal'.
| |
| * '''Choose the Desired Terminal:''' Identify and select the terminal you wish to configure.
| |
| * '''Configure System Parameters:''' Click on the 'Config System Parameter' icon.
| |
| * '''Access System Settings:''' In the popup, navigate to the 'System' tab.
| |
| * '''Disable Hotspot:''' In the 'WIFI HotSpot' dropdown list, select 'Disabled'.
| |
| * '''Commit Changes:''' Click 'Commit' to apply the new settings.
| |
| == Important Notes: ==
| |
| * '''Firmware Dependency:''' This feature is firmware-dependent. Disabling the hotspot through TMS will remove the 'Tethering & Portable Hotspot' menu from the terminal.
| |
| * '''Firmware Version Requirements:'''
| |
| ** Q2/K2/QD4/M2 models require firmware version 3962 or higher.
| |
| ** Q1v2 model requires firmware version 0481 or higher.
| |
| ** Q2A7 model requires firmware version 0240 or higher.
| |