Error code: Difference between revisions

From wizarPOS
(Replaced content with "{{Migrating|https://smartpossdk.gitbook.io/cloudpossdk/cloudpos-sdk/error-code}}")
Tag: Replaced
 
(21 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== Error code in C interface == 
{{Migrating|https://smartpossdk.gitbook.io/cloudpossdk/cloudpos-sdk/error-code}}
  Convert the unsigned result to three bytes as Byte1Byte2Byte3,Byte1 signifies the hardware code,Byte2 signifies the hardware error,Byte3 signifies the software error.
  If Byte2 != 0, it is a hardware error.
  If Byte2 ==0 and Byte3 != 0, it is a software error.
  ''For example, if one method of C interface return 196609, firstly changed it to hex value, it's 30001, 3 is byte1, 00 is byte2, 01 is byte3, ''
  ''byte2 is 0 and byte3 is not 0, so it's a software error, ''
  ''byte3 is 0x01, so find the error in the Software Error table, 1 means "Operation not permitted".''
=== Software Error ===
{| class="wikitable"
|-
! Code !! Description
|-
| 1(0x01) || Operation not permitted
|-
| 2(0x02) || No such file or directory
|-
| 3(0x03) || No such process
|-
| 4(0x04) || Interrupted system call
|-
| 5(0x05)|| I/O error
|-
| 6(0x06) || No such device or address                                 
|-
| 7(0x07) || Arg list too long
|-
| 8(0x08) || Exec format error
|-
| 9(0x09) || Bad file number
|-
| 10(0x0A) || No child processes
|-
| 11(0x0B) || Try again
|-
| 12(0x0C) || Out of memory
|-
| 13(0x0D)|| Permission denied
|-
| 14(0x0E) || Bad address
|-
| 15(0x0F) || Block device required
|-
| 16(0x10) || Device or resource busy
|-
| 17(0x11) || File exists
|-
| 18(0x12) || Cross-device link
|-
| 19(0x13) || No such device
|-
| 20(0x14) || Not a directory
|-
| 21(0x15) || Is a directory
|-
| 22(0x16) || Invalid argument
|-
| 23(0x17) || File table overflow
|-
| 24(0x18) || Too many open files
|-
| 25(0x19) || Not a typewriter
|-
| 26(0x1A) || Text file busy
|-
| 27(0x1B) ||  File too large
|-
| 28(0x1C) || No space left on device
|-
| 29(0x1D) || Illegal seek
|-
| 30(0x1E) || Read-only file system
|-
| 31(0x1F) || Too many links
|-
| 32(0x20) || Broken pipe
|-
| 33(0x21) || Math argument out of domain of func
|-
| 34(0x22) || Math result not representable
|-
| 35(0x23) || Resource deadlock would occur
|-
| 36(0x24) || File name too long
|-
| 37(0x25) || No record locks available
|-
| 38(0x26) || Function not implemented
|-
| 39(0x27) || Directory not empty
|-
| 40(0x28) || Too many symbolic links encountered
|-
| 41(0x29) || Operation would block
|-
| 42(0x2A) || No message of desired type
|-
| 43(0x2B) || Identifier removed
|-
| 44(0x2C) || Channel number out of range
|-
| 45(0x2D) || Level 2 not synchronized
|-
| 46(0x2E) || Level 3 halted
|-
| 47(0x2F) || Level 3 reset
|-
| 48(0x30) || Link number out of range
|-
| 49(0x31) || Protocol driver not attached
|-
| 50(0x32) || No CSI structure available
|-
| 51(0x33) || Level 2 halted
|-
| 52(0x34) || Invalid exchange
|-
| 53(0x35) || Invalid request descriptor
|-
| 54(0x36) || Exchange full
|-
| 55(0x37) || No anode
|-
| 56(0x38) || Invalid request code
|-
| 57(0x39) || Invalid slot
|-
| 58(0x3A) || EDEADLK
|-
| 59(0x3B) || Bad font file format
|-
| 60(0x3C) || Device not a stream
|-
| 61(0x3D) || No data available
|-
| 62(0x3E) || Timer expired
|-
| 63(0x3F) || Out of streams resources
|-
| 64(0x40) || Machine is not on the network
|-
| 65(0x41) || Package not installed
|-
| 66(0x42) || Object is remote
|-
| 67(0x43) || Link has been severed
|-
| 68(0x44) || Advertise error
|-
| 69(0x45) || Srmount error
|-
| 70(0x46) || Communication error on send
|-
| 71(0x47) || Protocol error
|-
| 72(0x48) || Multihop attempted
|-
| 73(0x49) || RFS specific error
|-
| 74(0x4A) || Not a data message
|-
| 75(0x4B) || Value too large for defined data type
|-
| 76(0x4C) || Name not unique on network
|-
| 77(0x4D) || File descriptor in bad state
|-
| 78(0x4E) || Remote address changed
|-
| 79(0x4F) || Can not access a needed shared library
|-
| 80(0x50) || Accessing a corrupted shared library
|-
| 81(0x51) || .lib section in a.out corrupted
|-
| 82(0x52) || Attempting to link in too many shared libraries
|-
| 83(0x53) || Cannot exec a shared library directly
|-
| 84(0x54) || Illegal byte sequence
|-
| 85(0x55) || Interrupted system call should be restarted
|-
| 86(0x56) || Streams pipe error
|-
| 87(0x57) || Too many users
|-
| 88(0x58) || Socket operation on non-socket
|-
| 89(0x59) || Destination address required
|-
| 90(0x5A) || Message too long
|-
| 91(0x5B) || Protocol wrong type for socket
|-
| 92(0x5C) || Protocol not available
|-
| 93(0x5D) || Protocol not supported
|-
| 94(0x5E) || Socket type not supported
|-
| 95(0x5F) || Operation not supported on transport endpoint
|-
| 96(0x60) || Protocol family not supported
|-
| 97(0x61) || Address family not supported by protocol
|-
| 98(0x62) || Address already in use
|-
| 99(0x63) || Cannot assign requested address
|-
| 100(0x64) || Network is down
|-
| 101(0x65) || Network is unreachable
|-
| 102(0x66) || Network dropped connection because of reset
|-
| 103(0x67) || Software caused connection abort
|-
| 104(0x68) || Connection reset by peer
|-
| 105(0x69) || No buffer space available
|-
| 106(0x6A) || Transport endpoint is already connected
|-
| 107(0x6B) || Transport endpoint is not connected
|-
| 108(0x6C) || Cannot send after transport endpoint shutdown
|-
| 109(0x6D) || Too many references: cannot splice
|-
| 110(0x6E) || Connection timed out
|-
| 111(0x6F) || Connection refused
|-
| 112(0x70) || Host is down
|-
| 113(0x71) || No route to host
|-
| 114(0x72) || Operation already in progress
|-
| 115(0x73) || Operation now in progress
|-
| 116(0x74) || Stale NFS file handle
|-
| 117(0x75) || Structure needs cleaning
|-
| 118(0x76) || Not a XENIX named type file
|-
| 119(0x77) || No XENIX semaphores available
|-
| 120(0x78) || Is a named type file
|-
| 121(0x79) || Remote I/O error
|-
| 122(0x7A) || Quota exceeded
|-
| 123(0x7B) || No medium found
|-
| 124(0x7C) || Wrong medium type
|}
 
=== Hardware Error ===
==== MSR ====
{| class="wikitable"
|-
! Code !! Description
|-
| 0x00 || success
|-
| 0x01 || General error
|-
| 0x40 || Mismatch in the field of STX
|-
| 0x41 || Mismatch in the field of class
|-
| 0x42 || Mismatch in the field of function
|-
| 0x43 || Mismatch in the field of length
|-
| 0x44 || Mismatch in the field of ETX
|-
| 0x45 || Mismatch in the field of LRC
|-
| 0x46 || Mismatch in the field of MODE
|-
| 0x51 || Preamble error in card read data
|-
| 0x52 || Postamble error in card read data
|-
| 0x53 || LRC error in card read data
|-
| 0x54 || Parity error in card read data
|-
| 0x55 || Blank track
|-
| 0x61 || STX/ETX error in command communication
|-
| 0x62 || Class/Function un-recognizable in command
|-
| 0x63 || BCC error in command communication
|-
| 0x64 || Length error in command communication
|-
| 0x65 || No data available to re-read
|-
| 0x71 || No more space available for OPT write
|-
| 0x72 || OTP write try without data
|-
| 0x73 || CRC error in read data from OTP
|-
| 0x74 || No data stored in OTP
|}
==== SmartCard Reader ====
{| class="wikitable"
|-
! Code !! Description
|-
| 0x00 || success
|-
| 0x01 || CMD_FAILED
|-
| 0x10 || AU9540_MSG_TYPE_NOT_MATCH
|-
| 0x11 || AU9540_MSG_SLOT_NOT_MATCH
|-
| 0x12 || AU9540_MSG_SEQ_NOT_MATCH
|-
| 0x13 || AU9540_MSG_NEED_MORE_WAIT_TIME
|-
| 0xF4 || PROCEDURE_BYTE_CONFLICT
|-
| 0xF6 || ICC_PROTOCOL_NOT_SUPPORTED
|-
| 0xF7 || BAD_ATR_TCK
|-
| 0xF8 || BAD_ATR_TS
|-
| 0xFB || An all inclusive hardware error occurred
|-
| 0xFD || Parity error while talking to the ICC
|-
| 0xFE || timed out while talking to the ICC
|-
| 0xFF || Host aborted the current activity
|}
==== PINPAD ====
{| class="wikitable"
|-
! Code !! Description
|-
| 0x00 || success
|-
| 0x11 || access denied
|-
| 0x12 || wrong command id
|-
| 0x13 || wrong package length
|-
| 0x14 || user cancel
|-
| 0x15 || wrong length of field
|-
| 0x20 || no key in this sector
|-
| 0x21 || out of range of pin length
|-
| 0x22 || failed in authentication
|-
| 0x23 || wrong length of key
|-
| 0x24 || wrong check value of session key
|-
| 0x25 || failed in writing flash
|-
| 0x26 || failed in reading flash
|-
| 0x27 || no key in this field
|-
| 0x28 || input is out legal range
|-
| 0x29 || failed in checking integrity
|-
| 0x2A || failed in encrypting using aes key text
|-
| 0x2B || failed in decrypting using aes key
|-
| 0x2C || break rules about data sensitivity
|-
| 0x2D || failed in the process of calculating mac
|-
| 0x2E || data length is not aligned
|}

Latest revision as of 05:30, 8 April 2024

Please visit new link of same subject:

https://smartpossdk.gitbook.io/cloudpossdk/cloudpos-sdk/error-code

We're making a move! Our site's content is migrating to a new URL, to provide you with an enhanced browsing experience. Please update your bookmarks accordingly. Thank you for your continuous support!