Error code: Difference between revisions

From wizarPOS
No edit summary
No edit summary
Line 311: Line 311:
|-
|-
| 0x74 || No data stored in OTP
| 0x74 || No data stored in OTP
|}
==== SmartCard Reader ====
{| class="wikitable"
|-
! Code !! Description
|-
| 0x00 || success
|-
| 0x01 || CMD_FAILED
|-
| 0x10 || AU9540_MSG_TYPE_NOT_MATCH
|-
| 0x11 || AU9540_MSG_SLOT_NOT_MATCH
|-
| 0x12 || AU9540_MSG_SEQ_NOT_MATCH
|-
| 0x13 || AU9540_MSG_NEED_MORE_WAIT_TIME
|-
| 0xF4 || PROCEDURE_BYTE_CONFLICT
|-
| 0xF6 || ICC_PROTOCOL_NOT_SUPPORTED
|-
| 0xF7 || BAD_ATR_TCK
|-
| 0xF8 || BAD_ATR_TS
|-
| 0xFB || An all inclusive hardware error occurred
|-
| 0xFD || Parity error while talking to the ICC
|-
| 0xFE || timed out while talking to the ICC
|-
| 0xFF || Host aborted the current activity
|}
==== PINPAD ====
{| class="wikitable"
|-
! Code !! Description
|-
| 0x00 || success
|-
| 0x11 || access denied
|-
| 0x12 || wrong command id
|-
| 0x13 || wrong package length
|-
| 0x14 || user cancel
|-
| 0x15 || wrong length of field
|-
| 0x20 || no key in this sector
|-
| 0x21 || out of range of pin length
|-
| 0x22 || failed in authentication
|-
| 0x23 || wrong length of key
|-
| 0x24 || wrong check value of session key
|-
| 0x25 || failed in writing flash
|-
| 0x26 || failed in reading flash
|-
| 0x27 || no key in this field
|-
| 0x28 || input is out legal range
|-
| 0x29 || failed in checking integrity
|-
| 0x2A || failed in encrypting using aes key text
|-
| 0x2B || failed in decrypting using aes key
|-
| 0x2C || break rules about data sensitivity
|-
| 0x2D || failed in the process of calculating mac
|-
| 0x2E || data length is not aligned
|}
|}

Revision as of 03:16, 27 March 2018

Error code in C interface

 Convert the unsigned result to three bytes as Byte1Byte2Byte3,Byte1 signifies the hardware code,Byte2 signifies the hardware error,Byte3 signifies the software error.
 If Byte2 != 0, it is a hardware error.
 If Byte2 ==0 and Byte3 != 0, it is a software error.
 For example, if one method of C interface return 196609, firstly changed it to hex value, it's 30001, 3 is byte1, 00 is byte2, 01 is byte3, 
 byte2 is 0 and byte3 is not 0, so it's a software error, 
 then change byte3 to decimal value, the value after changed is 1, so find the error in the Software Error table, 1 means "Operation not permitted".

Software Error

Code Description
1 Operation not permitted
2 No such file or directory
3 No such process
4 Interrupted system call
5 I/O error
6 No such device or address
7 Arg list too long
8 Exec format error
9 Bad file number
10 No child processes
11 Try again
12 Out of memory
13 Permission denied
14 Bad address
15 Block device required
16 Device or resource busy
17 File exists
18 Cross-device link
19 No such device
20 Not a directory
21 Is a directory
22 Invalid argument
23 File table overflow
24 Too many open files
25 Not a typewriter
26 Text file busy
27 File too large
28 No space left on device
29 Illegal seek
30 Read-only file system
31 Too many links
32 Broken pipe
33 Math argument out of domain of func
34 Math result not representable
35 Resource deadlock would occur
36 File name too long
37 No record locks available
38 Function not implemented
39 Directory not empty
40 Too many symbolic links encountered
41 Operation would block
42 No message of desired type
43 Identifier removed
44 Channel number out of range
45 Level 2 not synchronized
46 Level 3 halted
47 Level 3 reset
48 Link number out of range
49 Protocol driver not attached
50 No CSI structure available
51 Level 2 halted
52 Invalid exchange
53 Invalid request descriptor
54 Exchange full
55 No anode
56 Invalid request code
57 Invalid slot
58 EDEADLK
59 Bad font file format
60 Device not a stream
61 No data available
62 Timer expired
63 Out of streams resources
64 Machine is not on the network
65 Package not installed
66 Object is remote
67 Link has been severed
68 Advertise error
69 Srmount error
70 Communication error on send
71 Protocol error
72 Multihop attempted
73 RFS specific error
74 Not a data message
75 Value too large for defined data type
76 Name not unique on network
77 File descriptor in bad state
78 Remote address changed
79 Can not access a needed shared library
80 Accessing a corrupted shared library
81 .lib section in a.out corrupted
82 Attempting to link in too many shared libraries
83 Cannot exec a shared library directly
84 Illegal byte sequence
85 Interrupted system call should be restarted
86 Streams pipe error
87 Too many users
88 Socket operation on non-socket
89 Destination address required
90 Message too long
91 Protocol wrong type for socket
92 Protocol not available
93 Protocol not supported
94 Socket type not supported
95 Operation not supported on transport endpoint
96 Protocol family not supported
97 Address family not supported by protocol
98 Address already in use
99 Cannot assign requested address
100 Network is down
101 Network is unreachable
102 Network dropped connection because of reset
103 Software caused connection abort
104 Connection reset by peer
105 No buffer space available
106 Transport endpoint is already connected
107 Transport endpoint is not connected
108 Cannot send after transport endpoint shutdown
109 Too many references: cannot splice
110 Connection timed out
111 Connection refused
112 Host is down
113 No route to host
114 Operation already in progress
115 Operation now in progress
116 Stale NFS file handle
117 Structure needs cleaning
118 Not a XENIX named type file
119 No XENIX semaphores available
120 Is a named type file
121 Remote I/O error
122 Quota exceeded
123 No medium found
124 Wrong medium type

Hardware Error

MSR

Code Description
0x00 success
0x01 General error
0x40 Mismatch in the field of STX
0x41 Mismatch in the field of class
0x42 Mismatch in the field of function
0x43 Mismatch in the field of length
0x44 Mismatch in the field of ETX
0x45 Mismatch in the field of LRC
0x46 Mismatch in the field of MODE
0x51 Preamble error in card read data
0x52 Postamble error in card read data
0x53 LRC error in card read data
0x54 Parity error in card read data
0x55 Blank track
0x61 STX/ETX error in command communication
0x62 Class/Function un-recognizable in command
0x63 BCC error in command communication
0x64 Length error in command communication
0x65 No data available to re-read
0x71 No more space available for OPT write
0x72 OTP write try without data
0x73 CRC error in read data from OTP
0x74 No data stored in OTP

SmartCard Reader

Code Description
0x00 success
0x01 CMD_FAILED
0x10 AU9540_MSG_TYPE_NOT_MATCH
0x11 AU9540_MSG_SLOT_NOT_MATCH
0x12 AU9540_MSG_SEQ_NOT_MATCH
0x13 AU9540_MSG_NEED_MORE_WAIT_TIME
0xF4 PROCEDURE_BYTE_CONFLICT
0xF6 ICC_PROTOCOL_NOT_SUPPORTED
0xF7 BAD_ATR_TCK
0xF8 BAD_ATR_TS
0xFB An all inclusive hardware error occurred
0xFD Parity error while talking to the ICC
0xFE timed out while talking to the ICC
0xFF Host aborted the current activity

PINPAD

Code Description
0x00 success
0x11 access denied
0x12 wrong command id
0x13 wrong package length
0x14 user cancel
0x15 wrong length of field
0x20 no key in this sector
0x21 out of range of pin length
0x22 failed in authentication
0x23 wrong length of key
0x24 wrong check value of session key
0x25 failed in writing flash
0x26 failed in reading flash
0x27 no key in this field
0x28 input is out legal range
0x29 failed in checking integrity
0x2A failed in encrypting using aes key text
0x2B failed in decrypting using aes key
0x2C break rules about data sensitivity
0x2D failed in the process of calculating mac
0x2E data length is not aligned