How to Configure System Settings in possystemsettings.xml: Difference between revisions

From wizarPOS
(Replaced content with "{{Migrating|https://smartpossdk.gitbook.io/cloudpossdk/faq/firmware/configure-pos-system-settings}}")
Tag: Replaced
 
Line 1: Line 1:
== File Description and Update Process ==
{{Migrating|https://smartpossdk.gitbook.io/cloudpossdk/faq/firmware/configure-pos-system-settings}}
'''Important Note:''' The file name must be possystemsettings.xml and cannot be modified.
<syntaxhighlight lang="java">
<?xml version="1.0" encoding="utf-8"?>
<!--system language-->  <!--time zone-->
<terminal language = "CHINA" timezone = "Asia/Shanghai"> 
    <!-- set the default wifi ssid to HuiYin, this ssid should be included in networklist--> <!--forceopen means enable wifi immediatly-->
    <wifi defaultssid="HuiYin" forceopen="false"/>
    <!-- The pre-defined wifi ssid list-->
    <networklist>
        <network ssid="HuiYin" security="WPA/WPA2_PSK" password="wizarpossystem"/>
        <network ssid="HuiYin1" security="WPA/WPA2_PSK" password="wizarpossystem"/>
        <network ssid="HuiYin2" security="WPA/WPA2_PSK" password="wizarpossystem"/>
        <network ssid="HuiYin3" security="WPA/WPA2_PSK" password="wizarpossystem"/>
        <network ssid="test" security="NONE" password="wizarpossystem"/>
    </networklist>
 
    <!-- the default apn name, this apn should be included in the apnlist-->
    <defaultapn defaultapn="apnName1"/>
    <!--the pre-defined apn list-->
    <apnlist>
        <!--name is the name of the apn item--> <!-- apn, mcc and mnc should be the correct value of local processor-->
        <apn name="apnName1" apn="cmnet" mcc="460" mnc="01"/>
        <apn name="apnName2" apn="cmwap" mcc="460" mnc="07"/>
    </apnlist>
 
    <!--set the autodatetime(true or false), autotimezone(true or false) and 24hour format(true or false)-->
    <datetime autodatetime="true" autotimezone="true" use24format="true"/>
    <!--set the auto rotate(true or false)-->  <!--set fone size, small or normal or large or huge-->
    <display autorotate="true" fontsize="normal"/>
    <!--set the default input method. IME_PACKAGE_NAME should be the real name of the package of input method apk -->
    <inputmethod inputmethodname="IME_PACKAGE_NAME"/>
    <!--enable the locate function-->   
    <!--Location setting element has been supported by PosSysAssistant app from 2.11.20-->
    <!--state could be all, internet, gps, off. -->
    <!--all: Location is on and Mode is High accuracy;-->
    <!--internet: Location is on and Mode is Battery saving; -->
    <!--gps: Location is on and Mode is Device only;-->
    <!--off: Location is off.-->
    <location state="all"/>
</terminal>
</syntaxhighlight >
== Updating via TF Card or Thumb Drive ==
#'''Folder Creation:'''
#* On a TF Card: Create a folder named ''''\wizarpos\homesettings\homesettings_XXX\''''. 'XXX' usually is 'wizarpos', aligning with the ''''ro.wp.logo'''' property value. Or the same with Thumb Drive as below.
#* On a Thumb Drive: Create a folder named ''''\cloudpos\config\''''. This requires PosSysAssistant app version greater than 2.11.8.
# '''Copying the File:'''
#* Copy ''''possystemsettings.xml'''' to the created folder.
#* The update process follows the same steps as installing an APK from a TF card or thumb drive.
== Updating via WizarView ==
# '''Upload to WizarView:'''
#* Add a new parameter file named ''''possystemsettings.xml'''' in WizarView.
#* Navigate to Applications > Application.
#* Click the '+' icon to open an edit window.
#* In the edit window, input the required details and select 'param' type.
#* Enter the package name (''''com.wizarpos.possys'''') and the file name (''''possystemsettings.xml'''').
#* Click 'Commit'.
# '''Configuring the File:'''
#* In Applications > Application, click 'Search'.
#* Choose the parameter file from the list.
#* Click the 'config' icon, then 'Upload'.
#* Select the file to upload and click 'Commit'.
# '''Pushing the Configuration:'''
#* Follow the instructions in the WizarView user manual to configure and push the settings to a terminal.

Latest revision as of 08:36, 7 April 2024

Please visit new link of same subject:

https://smartpossdk.gitbook.io/cloudpossdk/faq/firmware/configure-pos-system-settings

We're making a move! Our site's content is migrating to a new URL, to provide you with an enhanced browsing experience. Please update your bookmarks accordingly. Thank you for your continuous support!