Contactless API
Functions
open
void* contactless_card_open(CONTACTLESS_CARD_NOTIFIER fNotifier, void* pUserData, int* pErrorCode)
Initialize the contactless card reader.
Parameters
| fNotifier | Notifier of contactless card |
| pUserData | User data |
| pErrorCode | error code if return value is equals to 0 |
Returns
The result code, != 0, success, value is the handle of contactless card device; <0 failed.
search_target_begin
int contactless_card_search_target_begin(int nHandle, int nCardMode, int nFlagSearchAll, int nTimeout_MS)
Start searching the contactless card. If you set the nCardMode is auto, reader will try to activate card in type A, type B and type successively; If you set the nCardMode is type A, type B, or type C, reader only try to activate card in the specified way. Possible value of nCardMode :
- define CONTACTLESS_CARD_MODE_AUTO 0
- define CONTACTLESS_CARD_MODE_TYPE_A 1
- define CONTACTLESS_CARD_MODE_TYPE_B 2
- define CONTACTLESS_CARD_MODE_TYPE_C 3
You can terminate it using function search_target_end.
Parameters
| nHandle | Handle of this device, returned from open |
| nCardMode | Mode to search |
| nFlagSearchAll | Not used |
| nTimeout_MS | Time out in millseconds. If it is less than 0, then wait forever. |
Returns
The result code, >= 0, success; <0 error code.
search_target_end
int contactless_card_search_target_end(int nHandle)
Stop the process of searching card.
The search_target_begin and search_target_end apis are pair operations.
Parameters
| nHandle | Handle of this device, returned from open |
Returns
The result code, >= 0, success; <0 error code.