How to Update Firmware for WizarPOS Devices

From wizarPOS
Revision as of 01:40, 8 March 2019 by Hans (talk | contribs)

By TF card (terminal is off)

  • Unzip the package, copy the wizarpos folder into the root directory of the TF Card. (PS: 4G - 16G TF cards are acceptable, and it should be in FAT32 format.). Please confirm your folder structure of the TF card as following figures:
caption


  • In wizarHand Q1, Power off it and open the back of the terminal, and take off the power supply. Please install the TF card as following figures:
caption


  • In Q2, Power off it and open the back of the terminal. Please install the TF card as following figures:
caption


  • Power on the terminal, then the terminal will automatically upgrades.
  • When the update have successfully completed, you should open the main interface in the “Settings”option, and then click the “About POS”, checking the the information about “Build number” and “Kernel version”, which should be consistent with the relevant information given by the manufacturer. If the same, it is correctly installed. On the contrary, it should be taken to extract and install.

By USB Disk

This function requires system application PosSysAssistant version 2.11.8:

  • In USB Flash, create the foler, \cloudpos\image\, copy firmware zip package, XXX.zip which got from WizarPOS to this folder.
  • Insert the USB Disk to terminal by an OTG2USBHost converter, an install window will popup, check/uncheck the firmware to install. Default is check.
  • After confirming the new firmware will be copied to internal storage. Then a success window will popup when copy processing is finish. Please restart the terminal, then terminal will update the new firmware finally.

By TF Card(terminal is on)

This function requires system application PosSysAssistant version 2.11.8:

  • In TF Card, create the folder, \cloudpos\image\, copy firmware zip package, XXX.zip which got from wizarpos to this folder.
  • Insert the TF Card to an terminal which is already power on, after a while, an install window will popup, check/uncheck the firmware to install. Default is check.
  • After confirming the new firmware will be copied to internal storage. Then a success window will popup when copy processing is finish. Please restart the terminal, then terminal will update the new firmware finally.

By wizarview

Apply the update requirement to WizarPOS, they will prepare the upate for your POS. After the pos connect to internet, it will receive the upate, then follow the prompt in the POS to finish update.

By App

We define and aidl interface to update system. please look at the attachment doc and get [the demo]. But the firmware system package must get from us. [Document].

Retrieved from "http://sdkwiki.wizarpos.com/index.php?title=How_to_Update_Firmware_for_WizarPOS_Devices&oldid=891"