LED API

From wizarPOS
Revision as of 09:34, 11 March 2019 by Mahong (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

API Overview

The calling sequence is open>turn_on/turn_off/get_status>close

open

int led_open()

Open the LED device, which contains all the LED service. This operation should be used before other operations.

Returns
int The result code, >= 0, success; <0 error code.


close

int led_close()

Close the LED device, which contains all the LEDs’ service. The open and close API are pair operations. If you don’t want to use this device, you should call the close API to release this device.

Returns
int The result code, >= 0, success; <0 error code.


turn_on

int led_on(unsigned int nLedIndex)

Turn on the specified LED.

Parameters
nLedIndex unsigned int: Index of led, >= 0 && < MAX_LED_COUNT
Returns
int The result code, >= 0, success; <0 error code.


turn_off

int led_off(unsigned int nLedIndex)

Turn off the specified LED.

Parameters
nLedIndex unsigned int: Index of led, >= 0 && < MAX_LED_COUNT
Returns
int The result code, >= 0, success; <0 error code.


get_status

int led_get_status(unsigned int nLedIndex)

Get the status of the specified LED.

Parameters
nLedIndex unsigned int: Index of led, >= 0 && < MAX_LED_COUNT
Returns
int The result code, > 0, LED on; =0, LED off; <0 error code.