How to Use Ethernet Connectivity: Difference between revisions

From wizarPOS
No edit summary
No edit summary
Line 1: Line 1:
== Q1 ==
This guide provides instructions on how to enable Ethernet connectivity for Q1 and Q2 WizarPOS terminals.
1. Connect Ethernet module to the terminal through by OTG-USB.
== Ethernet Support for Q1 Terminal ==
 
# '''Connecting the Ethernet Module:'''
2. Enter to Settings-->Ethernet to enable Ethernet. In old firmware without the menu, please get and install the enable control [http://ftp.wizarpos.com/advanceSDK/EthernetCtrl_signed_DailyBuild.apk APK], run and enable Ethernet connnection.
#* Connect the Ethernet module to the Q1 terminal using an OTG-USB cable.
== Q2 ==
# E'''nabling Ethernet in Settings:'''
1. Order Ethernet module from Wizarpos, please contact David(david.wang@wizarpos.com).
#* Navigate to 'Settings' > 'Ethernet' to enable the Ethernet connection.
 
#* '''Note for Older Firmware:''' If the 'Ethernet' menu is not available in your firmware version, you will need to obtain and install the Ethernet enable control APK. Once installed, run the APK and enable the Ethernet connection.
2. Enter to Settings-->Ethernet to enable Ethernet.
== Ethernet Support for Q2 Terminal ==
# '''Acquiring the Ethernet Module:'''
#* To obtain an Ethernet module for the Q2 terminal, contact David Wang via email at david.wang@wizarpos.com.
# '''Enabling Ethernet in Settings:'''
#* Once the Ethernet module is connected, go to 'Settings' > 'Ethernet' to enable Ethernet connectivity.

Revision as of 16:38, 4 January 2024

This guide provides instructions on how to enable Ethernet connectivity for Q1 and Q2 WizarPOS terminals.

Ethernet Support for Q1 Terminal

  1. Connecting the Ethernet Module:
    • Connect the Ethernet module to the Q1 terminal using an OTG-USB cable.
  2. Enabling Ethernet in Settings:
    • Navigate to 'Settings' > 'Ethernet' to enable the Ethernet connection.
    • Note for Older Firmware: If the 'Ethernet' menu is not available in your firmware version, you will need to obtain and install the Ethernet enable control APK. Once installed, run the APK and enable the Ethernet connection.

Ethernet Support for Q2 Terminal

  1. Acquiring the Ethernet Module:
    • To obtain an Ethernet module for the Q2 terminal, contact David Wang via email at david.wang@wizarpos.com.
  2. Enabling Ethernet in Settings:
    • Once the Ethernet module is connected, go to 'Settings' > 'Ethernet' to enable Ethernet connectivity.
Retrieved from "http://sdkwiki.wizarpos.com/index.php?title=How_to_Use_Ethernet_Connectivity&oldid=3772"