Hardware: Difference between revisions

Latest revision as of 09:01, 28 October 2024

This content is restricted to authorized users only. Please log in to access additional information.

@@ Line 15: / Line 15: @@
 [http://ftp.wizarpos.com/techsupport/hardware/rechargewhenplugchargeragain.mp4 countermode下重新插拔充电器会马上充电视频（Q2P除外）]
+[http://ftp.wizarpos.com/techsupport/hardware/D22拆打印机视频.mp4 D22拆打印机视频.mp4 ]
+[http://ftp.wizarpos.com/techsupport/hardware/D3刷机、安装驱动手册及工具_from厂商_不发客户.zip D3刷机、安装驱动手册及工具_from厂商_不发客户.zip ]
+[http://ftp.wizarpos.com/techsupport/hardware/D3updatetool.zip D3updatetool.zip 可发客户 ]
+[http://ftp.wizarpos.com/techsupport/hardware/Q3MiniTFcard.pdf Q3Mini TF card位置图 ]
+[http://ftp.wizarpos.com/techsupport/hardware/Q2-Premium-20231025T054329Z-001.zip Q2P照片，可发客户]
+[http://ftp.wizarpos.com/techsupport/hardware/Q3-BLACK-20231025T054348Z-001.zip Q3照片，可发客户]
 ==MDB 相关问题==
@@ Line 22: / Line 34: @@
 * [https://ftp.wizarpos.com/techsupport/software/mdbtest/RS232QD_XiTongZhiJia.zip 驱动]
-==电池相关问题 redmine30555==
+==电池相关问题==
+* 电池不充电问题，If a terminal cannot be charged, please check the following:
+. Test with a normal battery that is confirmed to be rechargeable
+. Confirm that it is using a charger charged through DC Jack
+. Confirm if the charging indicator light and charging symbol are displayed properly
+. Confirm whether the battery voltage rises and the percentage of charging symbols increases after charging for a period of time
+. Confirm if the battery connector is welded properly
 * 【问题1】
 现象描述：关机状态插上电源后，会强制进入电池充电动画，但这个耗时较长（8-10s），进入动画之前按电源键是没有响应的
@@ Line 64: / Line 88: @@
 建议：充电低电流告警？
+==移动网络相关问题==
+[http://ftp.wizarpos.com/techsupport/hardware/移动网络无法使用处理流程-20180529.doc 移动网络无法使用处理流程]
+==串口取log相关问题==
+[http://ftp.wizarpos.com/techsupport/hardware/Retrieve%20logs%20through%20serial%20port.xlsx 通过UART串口获取log的方法]
 }}