Error code: Difference between revisions

From wizarPOS
(add software error and msr hardware error)
 
(Replaced content with "{{Migrating|https://smartpossdk.gitbook.io/cloudpossdk/cloudpos-sdk/error-code}}")
Tag: Replaced
 
(26 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== Error code in C interface == 
{{Migrating|https://smartpossdk.gitbook.io/cloudpossdk/cloudpos-sdk/error-code}}
  Convert the unsigned result to three bytes as Byte1Byte2Byte3,Byte1 signifies the hardware code,Byte2 signifies the hardware error,Byte3 signifies the software error.
  If Byte2 != 0, it is a hardware error.
  If Byte2 ==0 and Byte3 != 0, it is a software error.
=== Software Error ===
{| class="wikitable"
|-
! Code !! Description
|-
| 1 || Operation not permitted
|-
| 2 || No such file or directory
|-
| 3 || No such process
|-
| 4 || Interrupted system call
|-
| 5|| I/O error
|-
| 6 || No such device or address                                 
|-
| 7 || Arg list too long
|-
| 8 || Exec format error
|-
| 9 || Bad file number
|-
| 10 || No child processes
|-
| 11 || Try again
|-
| 12 || Out of memory
|-
| 13|| Permission denied
|-
| 14 || Bad address
|-
| 15 || Block device required
|-
| 16 || Device or resource busy
|-
| 17 || File exists
|-
| 18 || Cross-device link
|-
| 19 || No such device
|-
| 20 || Not a directory
|-
| 21 || Is a directory
|-
| 22 || Invalid argument
|-
| 23 || File table overflow
|-
| 24 || Too many open files
|-
| 25 || Not a typewriter
|-
| 26 || Text file busy
|-
| 27 ||  File too large
|-
| 28 || No space left on device
|-
| 29 || Illegal seek
|-
| 30 || Read-only file system
|-
| 31 || Too many links
|-
| 32 || Broken pipe
|-
| 33 || Math argument out of domain of func
|-
| 34 || Math result not representable
|-
| 35 || Resource deadlock would occur
|-
| 36 || File name too long
|-
| 37 || No record locks available
|-
| 38 || Function not implemented
|-
| 39 || Directory not empty
|-
| 40 || Too many symbolic links encountered
|-
| 41 || Operation would block
|-
| 42 || No message of desired type
|-
| 43 || Identifier removed
|-
| 44 || Channel number out of range
|-
| 45 || Level 2 not synchronized
|-
| 46 || Level 3 halted
|-
| 47 || Level 3 reset
|-
| 48 || Link number out of range
|-
| 49 || Protocol driver not attached
|-
| 50 || No CSI structure available
|-
| 51 || Level 2 halted
|-
| 52 || Invalid exchange
|-
| 53 || Invalid request descriptor
|-
| 54 || Exchange full
|-
| 55 || No anode
|-
| 56 || Invalid request code
|-
| 57 || Invalid slot
|-
| 58 || EDEADLK
|-
| 59 || Bad font file format
|-
| 60 || Device not a stream
|-
| 61 || No data available
|-
| 62 || Timer expired
|-
| 63 || Out of streams resources
|-
| 64 || Machine is not on the network
|-
| 65 || Package not installed
|-
| 66 || Object is remote
|-
| 67 || Link has been severed
|-
| 68 || Advertise error
|-
| 69 || Srmount error
|-
| 70 || Communication error on send
|-
| 71 || Protocol error
|-
| 72 || Multihop attempted
|-
| 73 || RFS specific error
|-
| 74 || Not a data message
|-
| 75 || Value too large for defined data type
|-
| 76 || Name not unique on network
|-
| 77 || File descriptor in bad state
|-
| 78 || Remote address changed
|-
| 79 || Can not access a needed shared library
|-
| 80 || Accessing a corrupted shared library
|-
| 81 || .lib section in a.out corrupted
|-
| 82 || Attempting to link in too many shared libraries
|-
| 83 || Cannot exec a shared library directly
|-
| 84 || Illegal byte sequence
|-
| 85 || Interrupted system call should be restarted
|-
| 86 || Streams pipe error
|-
| 87 || Too many users
|-
| 88|| Socket operation on non-socket
|-
| 89 || Destination address required
|-
| 90 || Message too long
|-
| 91 || Protocol wrong type for socket
|-
| 92 || Protocol not available
|-
| 93 || Protocol not supported
|-
| 94 || Socket type not supported
|-
| 95 || Operation not supported on transport endpoint
|-
| 96 || Protocol family not supported
|-
| 97 || Address family not supported by protocol
|-
| 98 || Address already in use
|-
| 99 || Cannot assign requested address
|-
| 100 || Network is down
|-
| 101 || Network is unreachable
|-
| 102 || Network dropped connection because of reset
|-
| 103 || Software caused connection abort
|-
| 104 || Connection reset by peer
|-
| 105 || No buffer space available
|-
| 106 || Transport endpoint is already connected
|-
| 107 || Transport endpoint is not connected
|-
| 108 || Cannot send after transport endpoint shutdown
|-
| 109 || Too many references: cannot splice
|-
| 110 || Connection timed out
|-
| 111 || Connection refused
|-
| 112 || Host is down
|-
| 113 || No route to host
|-
| 114 || Operation already in progress
|-
| 115 || Operation now in progress
|-
| 116 || Stale NFS file handle
|-
| 117 || Structure needs cleaning
|-
| 118 || Not a XENIX named type file
|-
| 119 || No XENIX semaphores available
|-
| 120 || Is a named type file
|-
| 121 || Remote I/O error
|-
| 122 || Quota exceeded
|-
| 123 || No medium found
|-
| 124 || Wrong medium type
|}
 
=== Hardware Error ===
==== MSR ====
{| class="wikitable"
|-
! Code !! Description
|-
| 0x00 || success
|-
| 0x01 || General error
|-
| 0x40 || Mismatch in the field of STX
|-
| 0x41 || Mismatch in the field of class
|-
| 0x42 || Mismatch in the field of function
|-
| 0x43 || Mismatch in the field of length
|-
| 0x44 || Mismatch in the field of ETX
|-
| 0x45 || Mismatch in the field of LRC
|-
| 0x46 || Mismatch in the field of MODE
|-
| 0x51 || Preamble error in card read data
|-
| 0x52 || Postamble error in card read data
|-
| 0x53 || LRC error in card read data
|-
| 0x54 || Parity error in card read data
|-
| 0x55 || Blank track
|-
| 0x61 || STX/ETX error in command communication
|-
| 0x62 || Class/Function un-recognizable in command
|-
| 0x63 || BCC error in command communication
|-
| 0x64 || Length error in command communication
|-
| 0x65 || No data available to re-read
|-
| 0x71 || No more space available for OPT write
|-
| 0x72 || OTP write try without data
|-
| 0x73 || CRC error in read data from OTP
|-
| 0x74 || No data stored in OTP
|}

Latest revision as of 05:30, 8 April 2024

Please visit new link of same subject:

https://smartpossdk.gitbook.io/cloudpossdk/cloudpos-sdk/error-code

We're making a move! Our site's content is migrating to a new URL, to provide you with an enhanced browsing experience. Please update your bookmarks accordingly. Thank you for your continuous support!

Retrieved from "http://sdkwiki.wizarpos.com/index.php?title=Error_code&oldid=4457"