Error code: Difference between revisions

From wizarPOS
No edit summary
(Replaced content with "{{Migrating|https://smartpossdk.gitbook.io/cloudpossdk/cloudpos-sdk/error-code}}")
Tag: Replaced
 
(18 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== Common Error code List == 
{{Migrating|https://smartpossdk.gitbook.io/cloudpossdk/cloudpos-sdk/error-code}}
* 75520 : No key in this field.
 
== Error code in C interface == 
  Convert the unsigned result to three bytes as Byte1Byte2Byte3,Byte 1 signifies the hardware code,Byte 2 signifies the hardware error,Byte 3 signifies the software error.
  If Byte 2 != 0, it is a hardware error.
  If Byte 2 ==0 and Byte 3 != 0, it is a software error.
  ''For example, if one method of C interface return 196609, firstly changed it to hex value, it's 30001, 3 is byte 1, 00 is byte 2, 01 is byte 3, ''
  ''byte 2 is 0 and byte 3 is not 0, so it's a software error, ''
  ''byte 3 is 0x01, so find the error in the Software Error table, 1 means "Operation not permitted".''
=== Software Error ===
{| class="wikitable"
|-
! Code(Hex)!!Code(Decimal) !! Description
|-
| 0x01 ||1  || Operation not permitted
|-         
| 0x02 ||2  || No such file or directory
|-         
| 0x03 ||3  || No such process
|-         
| 0x04 ||4  || Interrupted system call
|-         
| 0x05 || 5 ||I/O error
|-         
| 0x06 ||6  || No such device or address                                 
|-         
| 0x07 ||7  || Arg list too long
|-         
| 0x08 ||8  || Exec format error
|-         
| 0x09 ||9  || Bad file number
|-         
| 0x0A ||10 || No child processes
|-         
| 0x0B ||11 || Try again
|-
| 0x0C ||12 || Out of memory
|-
| 0x0D|| 13 ||Permission denied
|-
| 0x0E ||14 || Bad address
|-
| 0x0F ||15 || Block device required
|-
| 0x10 ||16 || Device or resource busy
|-
| 0x11 ||17 || File exists
|-
| 0x12 ||18 || Cross-device link
|-
| 0x13 ||19 || No such device
|-
| 0x14 ||20 || Not a directory
|-
| 0x15 ||21 || Is a directory
|-
| 0x16 ||22 || Invalid argument
|-
| 0x17 ||23 || File table overflow
|-
| 0x18 ||24 || Too many open files
|-
| 0x19 ||25 || Not a typewriter
|-
| 0x1A ||26 || Text file busy
|-
| 0x1B ||27 ||  File too large
|-
| 0x1C ||28 || No space left on device
|-
| 0x1D ||29 || Illegal seek
|-
| 0x1E ||30 || Read-only file system
|-
| 0x1F ||31 || Too many links
|-
| 0x20 ||32 || Broken pipe
|-
| 0x21 ||33 || Math argument out of domain of func
|-
| 0x22 ||34 || Math result not representable
|-
| 0x23 ||35 || Resource deadlock would occur
|-
| 0x24 ||36 || File name too long
|-
| 0x25 ||37 || No record locks available
|-
| 0x26 ||38 || Function not implemented
|-
| 0x27 ||39 || Directory not empty
|-
| 0x28 ||40 || Too many symbolic links encountered
|-
| 0x29 ||41 || Operation would block
|-
| 0x2A ||42 || No message of desired type
|-
| 0x2B ||43 || Identifier removed
|-
| 0x2C ||44 || Channel number out of range
|-
| 0x2D ||45 || Level 2 not synchronized
|-
| 0x2E ||46 || Level 3 halted
|-
| 0x2F ||47 || Level 3 reset
|-
| 0x30 ||48 || Link number out of range
|-
| 0x31 ||49 || Protocol driver not attached
|-
| 0x32 ||50 || No CSI structure available
|-
| 0x33 ||51 || Level 2 halted
|-
| 0x34 ||52 || Invalid exchange
|-
| 0x35 ||53 || Invalid request descriptor
|-
| 0x36 ||54 || Exchange full
|-
| 0x37 ||55 || No anode
|-
| 0x38 ||56 || Invalid request code
|-
| 0x39 ||57 || Invalid slot
|-
| 0x3A ||58 || EDEADLK
|-
| 0x3B ||59 || Bad font file format
|-
| 0x3C ||60 || Device not a stream
|-
| 0x3D ||61 || No data available
|-
| 0x3E ||62 || Timer expired
|-
| 0x3F ||63 || Out of streams resources
|-
| 0x40 ||64 || Machine is not on the network
|-
| 0x41 ||65 || Package not installed
|-
| 0x42 ||66 || Object is remote
|-
| 0x43 ||67 || Link has been severed
|-
| 0x44 ||68 || Advertise error
|-
| 0x45 ||69 || Srmount error
|-
| 0x46 ||70 || Communication error on send
|-
| 0x47 ||71 || Protocol error
|-
| 0x48 ||72 || Multihop attempted
|-
| 0x49 ||73 || RFS specific error
|-
| 0x4A ||74 || Not a data message
|-
| 0x4B ||75 || Value too large for defined data type
|-
| 0x4C ||76 || Name not unique on network
|-
| 0x4D ||77 || File descriptor in bad state
|-
| 0x4E ||78 || Remote address changed
|-
| 0x4F ||79 || Can not access a needed shared library
|-
| 0x50 ||80 || Accessing a corrupted shared library
|-
| 0x51 ||81 || .lib section in a.out corrupted
|-
| 0x52 ||82 || Attempting to link in too many shared libraries
|-
| 0x53 ||83 || Cannot exec a shared library directly
|-
| 0x54 ||84 || Illegal byte sequence
|-
| 0x55 ||85 || Interrupted system call should be restarted
|-
| 0x56 ||86 || Streams pipe error
|-
| 0x57 ||87 || Too many users
|-
| 0x58 ||88 || Socket operation on non-socket
|-
| 0x59 ||89 || Destination address required
|-
| 0x5A ||90 || Message too long
|-
| 0x5B ||91 || Protocol wrong type for socket
|-
| 0x5C ||92 || Protocol not available
|-
| 0x5D ||93 || Protocol not supported
|-
| 0x5E ||94 || Socket type not supported
|-
| 0x5F ||95 || Operation not supported on transport endpoint
|-
| 0x60 ||96 || Protocol family not supported
|-
| 0x61 ||97 || Address family not supported by protocol
|-
| 0x62 ||98 || Address already in use
|-
| 0x63 ||99 || Cannot assign requested address
|-
| 0x64 ||100|| Network is down
|-
| 0x65 ||101|| Network is unreachable
|-
| 0x66 ||102|| Network dropped connection because of reset
|-
| 0x67 ||103|| Software caused connection abort
|-
| 0x68 ||104|| Connection reset by peer
|-
| 0x69 ||105|| No buffer space available
|-
| 0x6A ||106|| Transport endpoint is already connected
|-
| 0x6B ||107|| Transport endpoint is not connected
|-
| 0x6C ||108|| Cannot send after transport endpoint shutdown
|-
| 0x6D ||109|| Too many references: cannot splice
|-
| 0x6E ||110|| Connection timed out
|-
| 0x6F ||111|| Connection refused
|-
| 0x70 ||112|| Host is down
|-
| 0x71 ||113|| No route to host
|-
| 0x72 ||114|| Operation already in progress
|-
| 0x73 ||115|| Operation now in progress
|-
| 0x74 ||116|| Stale NFS file handle
|-
| 0x75 ||117|| Structure needs cleaning
|-
| 0x76 ||118|| Not a XENIX named type file
|-
| 0x77 ||119|| No XENIX semaphores available
|-
| 0x78 ||120|| Is a named type file
|-
| 0x79 ||121|| Remote I/O error
|-
| 0x7A ||122|| Quota exceeded
|-
| 0x7B ||123|| No medium found
|-
| 0x7C ||124|| Wrong medium type
|}
 
=== Hardware Error ===
==== MSR ====
{| class="wikitable"
|-
! Code !! Description
|-
| 0x00 || success
|-
| 0x01 || General error
|-
| 0x40 || Mismatch in the field of STX
|-
| 0x41 || Mismatch in the field of class
|-
| 0x42 || Mismatch in the field of function
|-
| 0x43 || Mismatch in the field of length
|-
| 0x44 || Mismatch in the field of ETX
|-
| 0x45 || Mismatch in the field of LRC
|-
| 0x46 || Mismatch in the field of MODE
|-
| 0x51 || Preamble error in card read data
|-
| 0x52 || Postamble error in card read data
|-
| 0x53 || LRC error in card read data
|-
| 0x54 || Parity error in card read data
|-
| 0x55 || Blank track
|-
| 0x61 || STX/ETX error in command communication
|-
| 0x62 || Class/Function un-recognizable in command
|-
| 0x63 || BCC error in command communication
|-
| 0x64 || Length error in command communication
|-
| 0x65 || No data available to re-read
|-
| 0x71 || No more space available for OPT write
|-
| 0x72 || OTP write try without data
|-
| 0x73 || CRC error in read data from OTP
|-
| 0x74 || No data stored in OTP
|}
==== SmartCard Reader ====
{| class="wikitable"
|-
! Code !! Description
|-
| 0x00 || success
|-
| 0x01 || CMD_FAILED
|-
| 0x10 || AU9540_MSG_TYPE_NOT_MATCH
|-
| 0x11 || AU9540_MSG_SLOT_NOT_MATCH
|-
| 0x12 || AU9540_MSG_SEQ_NOT_MATCH
|-
| 0x13 || AU9540_MSG_NEED_MORE_WAIT_TIME
|-
| 0xF4 || PROCEDURE_BYTE_CONFLICT
|-
| 0xF6 || ICC_PROTOCOL_NOT_SUPPORTED
|-
| 0xF7 || BAD_ATR_TCK
|-
| 0xF8 || BAD_ATR_TS
|-
| 0xFB || An all inclusive hardware error occurred
|-
| 0xFD || Parity error while talking to the ICC
|-
| 0xFE || timed out while talking to the ICC
|-
| 0xFF || Host aborted the current activity
|}
==== PINPAD ====
{| class="wikitable"
|-
! Code !! Description
|-
| 0x00 || success
|-
| 0x11 || access denied
|-
| 0x12 || wrong command id
|-
| 0x13 || wrong package length
|-
| 0x14 || user cancel
|-
| 0x15 || wrong length of field
|-
| 0x20 || no key in this sector
|-
| 0x21 || out of range of pin length
|-
| 0x22 || failed in authentication
|-
| 0x23 || wrong length of key
|-
| 0x24 || wrong check value of session key
|-
| 0x25 || failed in writing flash
|-
| 0x26 || failed in reading flash
|-
| 0x27 || no key in this field
|-
| 0x28 || input is out legal range
|-
| 0x29 || failed in checking integrity
|-
| 0x2A || failed in encrypting using aes key text
|-
| 0x2B || failed in decrypting using aes key
|-
| 0x2C || break rules about data sensitivity
|-
| 0x2D || failed in the process of calculating mac
|-
| 0x2E || data length is not aligned
|}

Latest revision as of 05:30, 8 April 2024

Please visit new link of same subject:

https://smartpossdk.gitbook.io/cloudpossdk/cloudpos-sdk/error-code

We're making a move! Our site's content is migrating to a new URL, to provide you with an enhanced browsing experience. Please update your bookmarks accordingly. Thank you for your continuous support!

Retrieved from "http://sdkwiki.wizarpos.com/index.php?title=Error_code&oldid=4457"