ESC Commands: Difference between revisions

Revision as of 03:18, 18 April 2018

HT
Name	Horizontal tab
Format	ASCII HT Hex 09 Decimal 9
Description	Move the print position to the next tab position. If no tab position is set (it is default setting), this command will be ignored The tab position is set by ESC D If the tab position exceeds the print area, printing position will be moved to the starting position of next line (Considering as a line is full, print the data and feed one line).
Reference	ESC D

LF
Name	Print and feed paper
Format	ASCII LF Hex 0A Decimal 10
Description	Print the data in the printer buffer, then feed paper for one line according to the current line space settings. After printing, the print position moves to the beginning of the line.
Reference	ESC 2，ESC 3

CR
Name	Carriage return
Format	ASCII CR Hex 0D Decimal 13
Description	Adjust the print position to the starting position of this line and line feed.
Reference	LF

ESC SP n
Name	Set the right-side character space
Format	ASCII ESC SP n Hex 1B 20 n Decimal 27 32 n
Description	Set the right right-side character space is [n×0.125mm] For double width mode, the character right margin is double than normal mode. The command will not effective to Chinese characte
Default	n=0

ESC ! n
Name	set the font type
Format	ASCII ESC ! n Hex 1B 21 n Decimal 27 33 n
Description	Set the font type (italic, border, bold, double width, double height, inverse or underline). And the bit definitions of parameter n are shown as follows table
Reference	ESC -, ESC E, GS !
Default	n=0

LF
Name	Print and feed paper
Format	ASCII CR Hex 0D Decimal 13
Description	Adjust the print position to the starting position of this line and line feed.
Reference	ESC 2，ESC 3

LF
Name	Print and feed paper
Format	ASCII CR Hex 0D Decimal 13
Description	Adjust the print position to the starting position of this line and line feed.
Reference	ESC 2，ESC 3

LF
Name	Print and feed paper
Format	ASCII CR Hex 0D Decimal 13
Description	Adjust the print position to the starting position of this line and line feed.
Reference	ESC 2，ESC 3

LF
Name	Print and feed paper
Format	ASCII CR Hex 0D Decimal 13
Description	Adjust the print position to the starting position of this line and line feed.
Reference	ESC 2，ESC 3

LF
Name	Print and feed paper
Format	ASCII CR Hex 0D Decimal 13
Description	Adjust the print position to the starting position of this line and line feed.
Reference	ESC 2，ESC 3

LF
Name	Print and feed paper
Format	ASCII CR Hex 0D Decimal 13
Description	Adjust the print position to the starting position of this line and line feed.
Reference	ESC 2，ESC 3

LF
Name	Print and feed paper
Format	ASCII CR Hex 0D Decimal 13
Description	Adjust the print position to the starting position of this line and line feed.
Reference	ESC 2，ESC 3

LF
Name	Print and feed paper
Format	ASCII CR Hex 0D Decimal 13
Description	Adjust the print position to the starting position of this line and line feed.
Reference	ESC 2，ESC 3

LF
Name	Print and feed paper
Format	ASCII CR Hex 0D Decimal 13
Description	Adjust the print position to the starting position of this line and line feed.
Reference	ESC 2，ESC 3

@@ Line 99: / Line 99: @@
 ! ESC ! n !!
 |-
-| Name|| Print and feed paper
+| Name|| set the font type
 |-
-| Format|| ASCII	   CR
+| Format|| ASCII	   ESC ! n
-Hex	   0D
+Hex	   1B 21 n
-Decimal  13
+Decimal  27 33 n
 |-
-| Description|| Adjust the print position to the starting position of this line and line
+| Description|| Set the font type (italic, border, bold, double width, double height,
-feed.
+inverse or underline). And the bit definitions of parameter n are
+shown as follows table
 |-
-| Reference|| ESC 2，ESC 3
+| Reference|| ESC -, ESC E, GS !
+|-
+| Default|| n=0
 |}