How to Perform a Factory Data Reset: Difference between revisions

Revision as of 23:05, 28 December 2023

Warning:

Data Loss: This operation will erase all apps and data on your terminal.

Reset Procedure When Terminal is Powered On

Accessing Reset Menu:
- Navigate to 'Settings' > 'Backup & reset' > 'Factory data reset'.
Initiating Reset:
- After clicking 'Factory data reset', the terminal will reset to factory settings and remove all installed apps.

Reset Procedure When Terminal is Powered Off

For Q1 Model

Entering Recovery Mode:
- Press and hold the 'Power' button and 'Scan' button simultaneously for about 5 seconds.
Recovery UI:
- Wait for 20-30 seconds for the recovery UI to display.
Performing Factory Reset:
- In the recovery menu, select 'factory reset (wipe D/C)'.
- Use the 'Scan' button to navigate and the 'Power' button to confirm.
Reboot System:
- After a successful reset, select 'reboot system now'.

For Q2/K2 Models

Entering Recovery Mode:
- Press the 'Power' button and 'Volume(+)' button simultaneously to boot into recovery mode. Keep pressing 'Volume(+)' during startup.
Recovery UI:
- Wait for 20-30 seconds for the recovery UI to display.
Performing Factory Reset:
- In the recovery menu, select 'Wipe Data/factory reset'.
- Use 'Volume(-)' to navigate and the 'Power' key to confirm.
Reboot System:
- After a successful reset, select 'reboot system now'.

@@ Line 1: / Line 1: @@
+=== Warning: ===
+* '''Data Loss:''' This operation will erase all apps and data on your terminal.
+== Reset Procedure When Terminal is Powered On ==
+# '''Accessing Reset Menu:'''
+#* Navigate to 'Settings' > 'Backup & reset' > 'Factory data reset'.
+# '''Initiating Reset:'''
+#* After clicking 'Factory data reset', the terminal will reset to factory settings and remove all installed apps.
+== Reset Procedure When Terminal is Powered Off ==
+=== For Q1 Model ===
+# '''Entering Recovery Mode:'''
+#* Press and hold the 'Power' button and 'Scan' button simultaneously for about 5 seconds.
+# '''Recovery UI:'''
+#* Wait for 20-30 seconds for the recovery UI to display.
+# '''Performing Factory Reset:'''
+#* In the recovery menu, select 'factory reset (wipe D/C)'.
+#* Use the 'Scan' button to navigate and the 'Power' button to confirm.
+# '''Reboot System:'''
+#* After a successful reset, select 'reboot system now'.
+:: [[File:Q1resetfactorydata.jpg|none|300px|left|caption]]
-<big>'''Warning: This operation will remove all the apps and data in your terminal.'''
+=== For Q2/K2 Models ===
-</big>
+# '''Entering Recovery Mode:'''
+#* Press the 'Power' button and 'Volume(+)' button simultaneously to boot into recovery mode. Keep pressing 'Volume(+)' during startup.
-== Operate after terminal power on==
+# '''Recovery UI:'''
-* Go to system menu, Settings>Backup & reset>Factory data reset, after click, it will reset to factory setting and remove all the installed apps.
+#* Wait for 20-30 seconds for the recovery UI to display.
+# '''Performing Factory Reset:'''
-== Operate when terminal power off==
+#* In the recovery menu, select 'Wipe Data/factory reset'.
-=== Q1 ===
+#* Use 'Volume(-)' to navigate and the 'Power' key to confirm.
-* Press the "Power" button and "Scan" button at the same time, last about 5s.
+# '''Reboot System:'''
-* After 20-30s, the recovery UI displayed.
+#* After a successful reset, select 'reboot system now'.
-* In recovery menu, select "factory reset(wipe D/C) to reset". Please use "Scan" button to switch between the sub menus and use "Power" button to confirm.
+:: [[File:Q2resetfactorydata.png|none|300px|left|caption]]
-* After reset success, select reboot system now.
-[[File:Q1resetfactorydata.jpg|none|300px|left|caption]]
-=== Q2/K2 ===
-* Press "Power" button and "Volume(+)" button at the same time to reboot the terminal into recovery mode. Notes: when the terminal start, keep on pressing the "Volume(+)" is easy way.
-* After 20-30s, the recovery UI displayed.
-* In recovery menu, select "factory Wipe Data/factory reset". Please use "Volume(-)" button to switch between sub menus and use "Power" key to confirm.
-* After reset success, select reboot system now.
-[[File:Q2resetfactorydata.png|none|300px|left|caption]]