Error code: Difference between revisions
| Line 27: | Line 27: | ||
== Error code in C interface == | == Error code in C interface == | ||
Get the absolute value of the error code, then convert it to HEX as Byte0Byte1Byte2Byte3.<br> | Get the absolute value of the error code, then check the absolute value. | ||
1) If the absolute value>10000, then convert it to HEX as Byte0Byte1Byte2Byte3.<br> | |||
Only check the right three bytes: Byte1Byte2Byte3, Byte1 represents the hardware type, Byte2 represents the hardware error, Byte3 represents the software error.<br> | Only check the right three bytes: Byte1Byte2Byte3, Byte1 represents the hardware type, Byte2 represents the hardware error, Byte3 represents the software error.<br> | ||
If Byte2 != 0, it means the hardware error. | If Byte2 != 0, it means the hardware error. | ||
| Line 34: | Line 35: | ||
''byte 2 is 0 and byte 3 is not 0, so it's a software error, '' | ''byte 2 is 0 and byte 3 is not 0, so it's a software error, '' | ||
''byte 3 is 0x01, so find the error in the Software Error table, 1 means "Operation not permitted".'' | ''byte 3 is 0x01, so find the error in the Software Error table, 1 means "Operation not permitted".'' | ||
2) If the absolute value is from 250 to 255, the error is from JNI source code, please check above common error code list. | |||
3) If other value, please send log to WizarPOS. | |||
=== Hardware Error (Byte2) === | === Hardware Error (Byte2) === | ||
Revision as of 08:47, 16 October 2020
Common Error code List
| Code | Description |
|---|---|
| -251 | JNI error, normal error. |
| -252 | JNI error, invalid argument. |
| -253 | JNI error, no implement. |
| -254 | JNI error, device has opened. |
| -255 | JNI error, device not opened. |
| -75520 | No key in this field. |
| -65792 | PinPad cancel. |
| -65538 | PinPad timeout. |
| -65676 | terminal certificate is not correct. |
| -74496 | wrong length of key. |
Error code in C interface
Get the absolute value of the error code, then check the absolute value. 1) If the absolute value>10000, then convert it to HEX as Byte0Byte1Byte2Byte3.
Only check the right three bytes: Byte1Byte2Byte3, Byte1 represents the hardware type, Byte2 represents the hardware error, Byte3 represents the software error.
If Byte2 != 0, it means the hardware error. If Byte2 ==0 and Byte 3 != 0, it means the software error.
For example, if one method of C interface return 196609, firstly changed it to hex value, it's 30001, 3 is byte 1, 00 is byte 2, 01 is byte 3, byte 2 is 0 and byte 3 is not 0, so it's a software error, byte 3 is 0x01, so find the error in the Software Error table, 1 means "Operation not permitted". 2) If the absolute value is from 250 to 255, the error is from JNI source code, please check above common error code list. 3) If other value, please send log to WizarPOS.
Hardware Error (Byte2)
MSR
| Code | Description |
|---|---|
| 0x00 | success |
| 0x01 | General error |
| 0x40 | Mismatch in the field of STX |
| 0x41 | Mismatch in the field of class |
| 0x42 | Mismatch in the field of function |
| 0x43 | Mismatch in the field of length |
| 0x44 | Mismatch in the field of ETX |
| 0x45 | Mismatch in the field of LRC |
| 0x46 | Mismatch in the field of MODE |
| 0x51 | Preamble error in card read data |
| 0x52 | Postamble error in card read data |
| 0x53 | LRC error in card read data |
| 0x54 | Parity error in card read data |
| 0x55 | Blank track |
| 0x61 | STX/ETX error in command communication |
| 0x62 | Class/Function un-recognizable in command |
| 0x63 | BCC error in command communication |
| 0x64 | Length error in command communication |
| 0x65 | No data available to re-read |
| 0x71 | No more space available for OPT write |
| 0x72 | OTP write try without data |
| 0x73 | CRC error in read data from OTP |
| 0x74 | No data stored in OTP |
SmartCard Reader
| Code | Description |
|---|---|
| 0x00 | success |
| 0x01 | CMD_FAILED |
| 0x10 | AU9540_MSG_TYPE_NOT_MATCH |
| 0x11 | AU9540_MSG_SLOT_NOT_MATCH |
| 0x12 | AU9540_MSG_SEQ_NOT_MATCH |
| 0x13 | AU9540_MSG_NEED_MORE_WAIT_TIME |
| 0xF4 | PROCEDURE_BYTE_CONFLICT |
| 0xF6 | ICC_PROTOCOL_NOT_SUPPORTED |
| 0xF7 | BAD_ATR_TCK |
| 0xF8 | BAD_ATR_TS |
| 0xFB | An all inclusive hardware error occurred |
| 0xFD | Parity error while talking to the ICC |
| 0xFE | timed out while talking to the ICC |
| 0xFF | Host aborted the current activity |
PINPAD
| Code | Description |
|---|---|
| 0x00 | success |
| 0x11 | access denied |
| 0x12 | wrong command id |
| 0x13 | wrong package length |
| 0x14 | user cancel |
| 0x15 | wrong length of field |
| 0x20 | no key in this sector |
| 0x21 | out of range of pin length |
| 0x22 | failed in authentication |
| 0x23 | wrong length of key |
| 0x24 | wrong check value of session key |
| 0x25 | failed in writing flash |
| 0x26 | failed in reading flash |
| 0x27 | no key in this field |
| 0x28 | input is out legal range |
| 0x29 | failed in checking integrity |
| 0x2A | failed in encrypting using aes key text |
| 0x2B | failed in decrypting using aes key |
| 0x2C | break rules about data sensitivity |
| 0x2D | failed in the process of calculating mac |
| 0x2E | data length is not aligned |
Software Error (Byte3)
| Code(Hex) | Code(Decimal) | Description |
|---|---|---|
| 0x01 | 1 | Operation not permitted |
| 0x02 | 2 | No such file or directory |
| 0x03 | 3 | No such process |
| 0x04 | 4 | Interrupted system call |
| 0x05 | 5 | I/O error |
| 0x06 | 6 | No such device or address |
| 0x07 | 7 | Arg list too long |
| 0x08 | 8 | Exec format error |
| 0x09 | 9 | Bad file number |
| 0x0A | 10 | No child processes |
| 0x0B | 11 | Try again |
| 0x0C | 12 | Out of memory |
| 0x0D | 13 | Permission denied |
| 0x0E | 14 | Bad address |
| 0x0F | 15 | Block device required |
| 0x10 | 16 | Device or resource busy |
| 0x11 | 17 | File exists |
| 0x12 | 18 | Cross-device link |
| 0x13 | 19 | No such device |
| 0x14 | 20 | Not a directory |
| 0x15 | 21 | Is a directory |
| 0x16 | 22 | Invalid argument |
| 0x17 | 23 | File table overflow |
| 0x18 | 24 | Too many open files |
| 0x19 | 25 | Not a typewriter |
| 0x1A | 26 | Text file busy |
| 0x1B | 27 | File too large |
| 0x1C | 28 | No space left on device |
| 0x1D | 29 | Illegal seek |
| 0x1E | 30 | Read-only file system |
| 0x1F | 31 | Too many links |
| 0x20 | 32 | Broken pipe |
| 0x21 | 33 | Math argument out of domain of func |
| 0x22 | 34 | Math result not representable |
| 0x23 | 35 | Resource deadlock would occur |
| 0x24 | 36 | File name too long |
| 0x25 | 37 | No record locks available |
| 0x26 | 38 | Function not implemented |
| 0x27 | 39 | Directory not empty |
| 0x28 | 40 | Too many symbolic links encountered |
| 0x29 | 41 | Operation would block |
| 0x2A | 42 | No message of desired type |
| 0x2B | 43 | Identifier removed |
| 0x2C | 44 | Channel number out of range |
| 0x2D | 45 | Level 2 not synchronized |
| 0x2E | 46 | Level 3 halted |
| 0x2F | 47 | Level 3 reset |
| 0x30 | 48 | Link number out of range |
| 0x31 | 49 | Protocol driver not attached |
| 0x32 | 50 | No CSI structure available |
| 0x33 | 51 | Level 2 halted |
| 0x34 | 52 | Invalid exchange |
| 0x35 | 53 | Invalid request descriptor |
| 0x36 | 54 | Exchange full |
| 0x37 | 55 | No anode |
| 0x38 | 56 | Invalid request code |
| 0x39 | 57 | Invalid slot |
| 0x3A | 58 | EDEADLK |
| 0x3B | 59 | Bad font file format |
| 0x3C | 60 | Device not a stream |
| 0x3D | 61 | No data available |
| 0x3E | 62 | Timer expired |
| 0x3F | 63 | Out of streams resources |
| 0x40 | 64 | Machine is not on the network |
| 0x41 | 65 | Package not installed |
| 0x42 | 66 | Object is remote |
| 0x43 | 67 | Link has been severed |
| 0x44 | 68 | Advertise error |
| 0x45 | 69 | Srmount error |
| 0x46 | 70 | Communication error on send |
| 0x47 | 71 | Protocol error |
| 0x48 | 72 | Multihop attempted |
| 0x49 | 73 | RFS specific error |
| 0x4A | 74 | Not a data message |
| 0x4B | 75 | Value too large for defined data type |
| 0x4C | 76 | Name not unique on network |
| 0x4D | 77 | File descriptor in bad state |
| 0x4E | 78 | Remote address changed |
| 0x4F | 79 | Can not access a needed shared library |
| 0x50 | 80 | Accessing a corrupted shared library |
| 0x51 | 81 | .lib section in a.out corrupted |
| 0x52 | 82 | Attempting to link in too many shared libraries |
| 0x53 | 83 | Cannot exec a shared library directly |
| 0x54 | 84 | Illegal byte sequence |
| 0x55 | 85 | Interrupted system call should be restarted |
| 0x56 | 86 | Streams pipe error |
| 0x57 | 87 | Too many users |
| 0x58 | 88 | Socket operation on non-socket |
| 0x59 | 89 | Destination address required |
| 0x5A | 90 | Message too long |
| 0x5B | 91 | Protocol wrong type for socket |
| 0x5C | 92 | Protocol not available |
| 0x5D | 93 | Protocol not supported |
| 0x5E | 94 | Socket type not supported |
| 0x5F | 95 | Operation not supported on transport endpoint |
| 0x60 | 96 | Protocol family not supported |
| 0x61 | 97 | Address family not supported by protocol |
| 0x62 | 98 | Address already in use |
| 0x63 | 99 | Cannot assign requested address |
| 0x64 | 100 | Network is down |
| 0x65 | 101 | Network is unreachable |
| 0x66 | 102 | Network dropped connection because of reset |
| 0x67 | 103 | Software caused connection abort |
| 0x68 | 104 | Connection reset by peer |
| 0x69 | 105 | No buffer space available |
| 0x6A | 106 | Transport endpoint is already connected |
| 0x6B | 107 | Transport endpoint is not connected |
| 0x6C | 108 | Cannot send after transport endpoint shutdown |
| 0x6D | 109 | Too many references: cannot splice |
| 0x6E | 110 | Connection timed out |
| 0x6F | 111 | Connection refused |
| 0x70 | 112 | Host is down |
| 0x71 | 113 | No route to host |
| 0x72 | 114 | Operation already in progress |
| 0x73 | 115 | Operation now in progress |
| 0x74 | 116 | Stale NFS file handle |
| 0x75 | 117 | Structure needs cleaning |
| 0x76 | 118 | Not a XENIX named type file |
| 0x77 | 119 | No XENIX semaphores available |
| 0x78 | 120 | Is a named type file |
| 0x79 | 121 | Remote I/O error |
| 0x7A | 122 | Quota exceeded |
| 0x7B | 123 | No medium found |
| 0x7C | 124 | Wrong medium type |
| 0x8c | 140 | X509_VERIFY_OK |
| 0x8e | 142 | X509_VERIFY_ERR_UNABLE_TO_GET_ISSUER_CERT |
| 0x8f | 143 | X509_VERIFY_ERR_UNABLE_TO_GET_CRL |
| 0x90 | 144 | X509_VERIFY_ERR_UNABLE_TO_DECRYPT_CERT_SIGNATURE |
| 0x91 | 145 | X509_VERIFY_ERR_UNABLE_TO_DECRYPT_CRL_SIGNATURE |
| 0x92 | 146 | X509_VERIFY_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY |
| 0x93 | 147 | X509_VERIFY_ERR_CERT_SIGNATURE_FAILURE |
| 0x94 | 148 | X509_VERIFY_ERR_CRL_SIGNATURE_FAILURE |
| 0x95 | 149 | X509_VERIFY_ERR_CERT_NOT_YET_VERIFYALID |
| 0x96 | 150 | X509_VERIFY_ERR_CERT_HAS_EXPIRED |
| 0x97 | 151 | X509_VERIFY_ERR_CRL_NOT_YET_VERIFYALID |
| 0x98 | 152 | X509_VERIFY_ERR_CRL_HAS_EXPIRED |
| 0x99 | 153 | X509_VERIFY_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD |
| 0x9a | 154 | X509_VERIFY_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD |
| 0x9b | 155 | X509_VERIFY_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD |
| 0x9c | 156 | X509_VERIFY_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD |
| 0x9d | 157 | X509_VERIFY_ERR_OUT_OF_MEM |
| 0x9e | 158 | X509_VERIFY_ERR_DEPTH_ZERO_SELF_SIGNED_CERT |
| 0x9f | 159 | X509_VERIFY_ERR_SELF_SIGNED_CERT_IN_CHAIN |
| 0xa0 | 160 | X509_VERIFY_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY |
| 0xa1 | 161 | X509_VERIFY_ERR_UNABLE_TO_VERIFYERIFY_LEAF_SIGNATURE |
| 0xa2 | 162 | X509_VERIFY_ERR_CERT_CHAIN_TOO_LONG |
| 0xa3 | 163 | X509_VERIFY_ERR_CERT_REVOKED |
| 0xa4 | 164 | X509_VERIFY_ERR_INVALID_CA |
| 0xa5 | 165 | X509_VERIFY_ERR_PATH_LENGTH_EXCEEDED |
| 0xa6 | 166 | X509_VERIFY_ERR_INVALID_PURPOSE |
| 0xa7 | 167 | X509_VERIFY_ERR_CERT_UNTRUSTED |
| 0xa8 | 168 | X509_VERIFY_ERR_CERT_REJECTED |
| 0xa9 | 169 | X509_VERIFY_ERR_SUBJECT_ISSUER_MISMATCH |
| 0xaa | 170 | X509_VERIFY_ERR_AKID_SKID_MISMATCH |
| 0xab | 171 | X509_VERIFY_ERR_AKID_ISSUER_SERIAL_MISMATCH |
| 0xac | 172 | X509_VERIFY_ERR_KEYUSAGE_NO_CERTSIGN |
| 0xad | 173 | X509_VERIFY_ERR_UNABLE_TO_GET_CRL_ISSUER |
| 0xae | 174 | X509_VERIFY_ERR_UNHANDLED_CRITICAL_EXTENSION |
| 0xaf | 175 | X509_VERIFY_ERR_KEYUSAGE_NO_CRL_SIGN |
| 0xb0 | 176 | X509_VERIFY_ERR_UNHANDLED_CRITICAL_CRL_EXTENSION |
| 0xb1 | 177 | X509_VERIFY_ERR_INVALID_NON_CA |
| 0xb2 | 178 | X509_VERIFY_ERR_PROXY_PATH_LENGTH_EXCEEDED |
| 0xb3 | 179 | X509_VERIFY_ERR_KEYUSAGE_NO_DIGITAL_SIGNATURE |
| 0xb4 | 180 | X509_VERIFY_ERR_PROXY_CERTIFICATES_NOT_ALLOWED |
| 0xb5 | 181 | X509_VERIFY_ERR_INVALID_EXTENSION |
| 0xb6 | 182 | X509_VERIFY_ERR_INVALID_POLICY_EXTENSION |
| 0xb7 | 183 | X509_VERIFY_ERR_NO_EXPLICIT_POLICY |
| 0xb8 | 184 | X509_VERIFY_ERR_DIFFERENT_CRL_SCOPE |
| 0xb9 | 185 | X509_VERIFY_ERR_UNSUPPORTED_EXTENSION_FEATURE |
| 0xba | 186 | X509_VERIFY_ERR_UNNESTED_RESOURCE |
| 0xbb | 187 | X509_VERIFY_ERR_PERMITTED_VERIFYIOLATION |
| 0xbc | 188 | X509_VERIFY_ERR_EXCLUDED_VERIFYIOLATION |
| 0xbd | 189 | X509_VERIFY_ERR_SUBTREE_MINMAX |
| 0xbe | 190 | X509_VERIFY_ERR_APPLICATION_VERIFYERIFICATION |
| 0xbf | 191 | X509_VERIFY_ERR_UNSUPPORTED_CONSTRAINT_TYPE |
| 0xc0 | 192 | X509_VERIFY_ERR_UNSUPPORTED_CONSTRAINT_SYNTAX |
| 0xc1 | 193 | X509_VERIFY_ERR_UNSUPPORTED_NAME_SYNTAX |
| 0xc2 | 194 | X509_VERIFY_ERR_CRL_PATH_VERIFYALIDATION_ERROR |
| 0xc3 | 195 | X509_VERIFY_ERR_KEYUSAGE_NOT_MATCH |
| 0xc8 | 200 | COMMON_ERR_GENERAL |
| 0xc9 | 201 | COMMON_ERR_INVALID_ARG |
| 0xca | 202 | COMMON_ERR_TIME_OUT |
| 0xcb | 203 | COMMON_ERR_OVERFLOW |
| 0xcc | 204 | COMMON_ERR_NO_MEM |
| 0xcd | 205 | COMMON_ERR_WRITE |
| 0xce | 206 | COMMON_ERR_READ |
| 0xcf | 207 | COMMON_ERR_NO_DATA |
| 0xd0 | 208 | COMMON_ERR_INVALID_HANDLE |
| 0xd1 | 209 | COMMON_ERR_NO_DEVICE |