How to Develop Serial Port for Terminals: Difference between revisions

Revision as of 02:41, 29 September 2020

When using the C API to open a serial port, you need to set the device name of a serial port as a parameter.

Device Name:

Parameters

device name

The alias for serial port. Available values: DB9, GS0_01, WIZARHANDQ1, Q1_USB_SERIAL, USB_SERIAL, SERIAL_EXT, USB_SLAVE_SERIAL, USB_HOST_SERIAL

in W1/W1V2:
- DB9: works for DB9 port at the back side of the terminal.
- GS0_Q1: works for USB host port at the right side of terminal to connect with Q1 via USB cable in master mode.
in Q1 3g:
- WIZARHANDQ1: works for USB serial port in slave mode.
- Q1_USB_SERIAL or USB_SERIAL: works for USB serial port in master mode.
- SERIAL_EXT: works for internal fiscal/other serial port module.
in Q1 4g and Q2(K2, M2, M3, QD4/5), Q3 series and others:
- USB_SLAVE_SERIAL: works for USB serial port in slave mode. For example, terminal use USB OTG cable connect the PC directly.
- USB_HOST_SERIAL or USB_SERIAL: works for USB serial port in master mode. For example, terminal connect an USB2Serial convertor or use UU cable.
- SERIAL_EXT: works for internal fiscal/other serial port module.

When using the Java API to open a serial port, you need to set the logic ID of a serial port as a parameter.

@@ Line 15: / Line 15: @@
 ** '''SERIAL_EXT''': works for internal fiscal/other serial port module.
 * '''in Q1 4g and Q2(K2, M2, M3, QD4/5), Q3 series and others:'''
-** '''USB_SLAVE_SERIAL''': works for USB serial port in slave mode.
+** '''USB_SLAVE_SERIAL''': works for USB serial port in slave mode. For example, terminal use USB OTG cable connect the PC directly.
-** '''USB_HOST_SERIAL''' or '''USB_SERIAL''': works for USB serial port in master mode.
+** '''USB_HOST_SERIAL''' or '''USB_SERIAL''': works for USB serial port in master mode. For example, terminal connect an USB2Serial convertor or use UU cable.
 ** '''SERIAL_EXT''': works for internal fiscal/other serial port module.
 |}