手工注入主密钥，客户调试时用: Difference between revisions

From wizarPOS
No edit summary
No edit summary
Line 8: Line 8:
Manually Inject Master Key / Transmission Key
Manually Inject Master Key / Transmission Key


1. Click Settings
1. Click Settings> About POS> POS Configuration> Load Key 
  - Go to About POS.


2. Select POS Configuration 
2. Select Input Key.
  - Go to POS Configuration.


3. Load Key 
3. Enter Authorization Password: `87654321`.
  - Select Load Key.


4. Select Input Key.
4. Choose the key type: 
* `1`: Master Key 
* `2`: Transmission Key
5. Input Key Index: `0-50` (choose the appropriate index).


5. Enter Authorization Password
6. Enter Component 1 Password: `88888888`.
  - Enter the authorization password: `87654321`.


6. Select Key Type 
7. Enter Component 1 Key: `Enter your key`.
  - Choose the key type:
    - `1`: Master Key 
    - `2`: Transmission Key


7. Input Key Index 
8. Enter Component 2 Password: `99999999`.
  - Enter the key index: `0-50` (choose the appropriate index).


8. Enter Component 1 Password 
9. Enter Component 2 Key: `Enter your key`.
  - Enter Component 1 password: `88888888`.
 
9. Enter Component 1 Key 
  - Input Component 1 key: `Enter your key`.
 
10. Enter Component 2 Password 
  - Enter Component 2 password: `99999999`.
 
11. Enter Component 2 Key
    - Input Component 2 key: `Enter your key`.
 
12. Calculate Master/Transmission Key 
    - Calculate the Master/Transmission Key: 
      `Master/Transmission Key = Component 1 Key XOR Component 2 Key`.


10. Calculate Master/Transmission Key: 
* `Master/Transmission Key = Component 1 Key XOR Component 2 Key`.
With these steps, you can successfully inject the master key or transmission key.
With these steps, you can successfully inject the master key or transmission key.
}}
}}

Revision as of 09:31, 8 February 2025

This content is restricted to authorized users only. Please log in to access additional information.

Retrieved from "http://sdkwiki.wizarpos.com/index.php?title=手工注入主密钥，客户调试时用&oldid=5098"