Error code in C interface
Convert the unsigned result to three bytes as Byte1Byte2Byte3,Byte1 signifies the hardware code,Byte2 signifies the hardware error,Byte3 signifies the software error.
If Byte2 != 0, it is a hardware error.
If Byte2 ==0 and Byte3 != 0, it is a software error.
For example, if one method of C interface return 196609, firstly changed it to hex value, it's 30001, 3 is byte1, 00 is byte2, 01 is byte3,
byte2 is 0 and byte3 is not 0, so it's a software error,
then change byte3 to decimal value, the value after changed is 1, so find the error in the Software Error table, 1 means "Operation not permitted".
Software Error
| Code |
Description
|
| 1(0x01) |
Operation not permitted
|
| 2(0x02) |
No such file or directory
|
| 3(0x03) |
No such process
|
| 4(0x04) |
Interrupted system call
|
| 5(0x05) |
I/O error
|
| 6(0x06) |
No such device or address
|
| 7(0x07) |
Arg list too long
|
| 8(0x08) |
Exec format error
|
| 9(0x09) |
Bad file number
|
| 10(0x0A) |
No child processes
|
| 11(0x0B) |
Try again
|
| 12(0x0C) |
Out of memory
|
| 13(0x0D) |
Permission denied
|
| 14(0x0E) |
Bad address
|
| 15(0x0F) |
Block device required
|
| 16(0x10) |
Device or resource busy
|
| 17(0x11) |
File exists
|
| 18(0x12) |
Cross-device link
|
| 19(0x13) |
No such device
|
| 20(0x14) |
Not a directory
|
| 21(0x15) |
Is a directory
|
| 22(0x16) |
Invalid argument
|
| 23(0x17) |
File table overflow
|
| 24(0x18) |
Too many open files
|
| 25(0x19) |
Not a typewriter
|
| 26(0x1A) |
Text file busy
|
| 27(0x1B) |
File too large
|
| 28(0x1C) |
No space left on device
|
| 29(0x1D) |
Illegal seek
|
| 30(0x1E) |
Read-only file system
|
| 31(0x1F) |
Too many links
|
| 32(0x20) |
Broken pipe
|
| 33(0x21) |
Math argument out of domain of func
|
| 34(0x22) |
Math result not representable
|
| 35(0x23) |
Resource deadlock would occur
|
| 36(0x24) |
File name too long
|
| 37(0x25) |
No record locks available
|
| 38(0x26) |
Function not implemented
|
| 39(0x27) |
Directory not empty
|
| 40(0x28) |
Too many symbolic links encountered
|
| 41(0x29) |
Operation would block
|
| 42(0x2A) |
No message of desired type
|
| 43(0x2B) |
Identifier removed
|
| 44(0x2C) |
Channel number out of range
|
| 45(0x2D) |
Level 2 not synchronized
|
| 46(0x2E) |
Level 3 halted
|
| 47(0x2F) |
Level 3 reset
|
| 48(0x30) |
Link number out of range
|
| 49(0x31) |
Protocol driver not attached
|
| 50(0x32) |
No CSI structure available
|
| 51(0x33) |
Level 2 halted
|
| 52(0x34) |
Invalid exchange
|
| 53(0x35) |
Invalid request descriptor
|
| 54(0x36) |
Exchange full
|
| 55(0x37) |
No anode
|
| 56(0x38) |
Invalid request code
|
| 57(0x39) |
Invalid slot
|
| 58(0x3A) |
EDEADLK
|
| 59(0x3B) |
Bad font file format
|
| 60(0x3C) |
Device not a stream
|
| 61(0x3D) |
No data available
|
| 62(0x3E) |
Timer expired
|
| 63(0x3F) |
Out of streams resources
|
| 64(0x40) |
Machine is not on the network
|
| 65(0x41) |
Package not installed
|
| 66(0x42) |
Object is remote
|
| 67(0x43) |
Link has been severed
|
| 68(0x44) |
Advertise error
|
| 69(0x45) |
Srmount error
|
| 70(0x46) |
Communication error on send
|
| 71(0x47) |
Protocol error
|
| 72(0x48) |
Multihop attempted
|
| 73(0x49) |
RFS specific error
|
| 74(0x4A) |
Not a data message
|
| 75(0x4B) |
Value too large for defined data type
|
| 76(0x4C) |
Name not unique on network
|
| 77(0x4D) |
File descriptor in bad state
|
| 78(0x4E) |
Remote address changed
|
| 79(0x4F) |
Can not access a needed shared library
|
| 80(0x50) |
Accessing a corrupted shared library
|
| 81(0x51) |
.lib section in a.out corrupted
|
| 82(0x52) |
Attempting to link in too many shared libraries
|
| 83(0x53) |
Cannot exec a shared library directly
|
| 84(0x54) |
Illegal byte sequence
|
| 85(0x55) |
Interrupted system call should be restarted
|
| 86(0x56) |
Streams pipe error
|
| 87(0x57) |
Too many users
|
| 88(0x58) |
Socket operation on non-socket
|
| 89(0x59) |
Destination address required
|
| 90(0x5A) |
Message too long
|
| 91(0x5B) |
Protocol wrong type for socket
|
| 92(0x5C) |
Protocol not available
|
| 93(0x5D) |
Protocol not supported
|
| 94(0x5E) |
Socket type not supported
|
| 95(0x5F) |
Operation not supported on transport endpoint
|
| 96(0x60) |
Protocol family not supported
|
| 97(0x61) |
Address family not supported by protocol
|
| 98(0x62) |
Address already in use
|
| 99(0x63) |
Cannot assign requested address
|
| 100(0x64) |
Network is down
|
| 101(0x65) |
Network is unreachable
|
| 102(0x66) |
Network dropped connection because of reset
|
| 103(0x67) |
Software caused connection abort
|
| 104(0x68) |
Connection reset by peer
|
| 105(0x69) |
No buffer space available
|
| 106(0x6A) |
Transport endpoint is already connected
|
| 107(0x6B) |
Transport endpoint is not connected
|
| 108(0x6C) |
Cannot send after transport endpoint shutdown
|
| 109(0x6D) |
Too many references: cannot splice
|
| 110(0x6E) |
Connection timed out
|
| 111(0x6F) |
Connection refused
|
| 112(0x70) |
Host is down
|
| 113(0x71) |
No route to host
|
| 114(0x72) |
Operation already in progress
|
| 115(0x73) |
Operation now in progress
|
| 116(0x74) |
Stale NFS file handle
|
| 117(0x75) |
Structure needs cleaning
|
| 118(0x76) |
Not a XENIX named type file
|
| 119(0x77) |
No XENIX semaphores available
|
| 120(0x78) |
Is a named type file
|
| 121(0x79) |
Remote I/O error
|
| 122(0x7A) |
Quota exceeded
|
| 123(0x7B) |
No medium found
|
| 124(0x7C) |
Wrong medium type
|
Hardware Error
MSR
| Code |
Description
|
| 0x00 |
success
|
| 0x01 |
General error
|
| 0x40 |
Mismatch in the field of STX
|
| 0x41 |
Mismatch in the field of class
|
| 0x42 |
Mismatch in the field of function
|
| 0x43 |
Mismatch in the field of length
|
| 0x44 |
Mismatch in the field of ETX
|
| 0x45 |
Mismatch in the field of LRC
|
| 0x46 |
Mismatch in the field of MODE
|
| 0x51 |
Preamble error in card read data
|
| 0x52 |
Postamble error in card read data
|
| 0x53 |
LRC error in card read data
|
| 0x54 |
Parity error in card read data
|
| 0x55 |
Blank track
|
| 0x61 |
STX/ETX error in command communication
|
| 0x62 |
Class/Function un-recognizable in command
|
| 0x63 |
BCC error in command communication
|
| 0x64 |
Length error in command communication
|
| 0x65 |
No data available to re-read
|
| 0x71 |
No more space available for OPT write
|
| 0x72 |
OTP write try without data
|
| 0x73 |
CRC error in read data from OTP
|
| 0x74 |
No data stored in OTP
|
SmartCard Reader
| Code |
Description
|
| 0x00 |
success
|
| 0x01 |
CMD_FAILED
|
| 0x10 |
AU9540_MSG_TYPE_NOT_MATCH
|
| 0x11 |
AU9540_MSG_SLOT_NOT_MATCH
|
| 0x12 |
AU9540_MSG_SEQ_NOT_MATCH
|
| 0x13 |
AU9540_MSG_NEED_MORE_WAIT_TIME
|
| 0xF4 |
PROCEDURE_BYTE_CONFLICT
|
| 0xF6 |
ICC_PROTOCOL_NOT_SUPPORTED
|
| 0xF7 |
BAD_ATR_TCK
|
| 0xF8 |
BAD_ATR_TS
|
| 0xFB |
An all inclusive hardware error occurred
|
| 0xFD |
Parity error while talking to the ICC
|
| 0xFE |
timed out while talking to the ICC
|
| 0xFF |
Host aborted the current activity
|
PINPAD
| Code |
Description
|
| 0x00 |
success
|
| 0x11 |
access denied
|
| 0x12 |
wrong command id
|
| 0x13 |
wrong package length
|
| 0x14 |
user cancel
|
| 0x15 |
wrong length of field
|
| 0x20 |
no key in this sector
|
| 0x21 |
out of range of pin length
|
| 0x22 |
failed in authentication
|
| 0x23 |
wrong length of key
|
| 0x24 |
wrong check value of session key
|
| 0x25 |
failed in writing flash
|
| 0x26 |
failed in reading flash
|
| 0x27 |
no key in this field
|
| 0x28 |
input is out legal range
|
| 0x29 |
failed in checking integrity
|
| 0x2A |
failed in encrypting using aes key text
|
| 0x2B |
failed in decrypting using aes key
|
| 0x2C |
break rules about data sensitivity
|
| 0x2D |
failed in the process of calculating mac
|
| 0x2E |
data length is not aligned
|
