Error code

From wizarPOS
Revision as of 03:22, 18 December 2023 by Mahong (talk | contribs)

Common Error Code List

Code Description
-251 JNI error, normal error.
-252 JNI error, invalid argument.
-253 JNI error, no implement.
-254 JNI error, device has opened.
-255 JNI error, device not opened.
-75520 No key in this field.
-65792 PinPad cancel.
-65538 PinPad timeout.
-65676 terminal certificate is not correct.
-74496 wrong length of key.

Error Codes in C Interface

 To interpret the error code, follow these steps:
  1. Obtain the absolute value of the error code and convert it to hexadecimal as Byte0Byte1Byte2Byte3.
  2. Examine the right three bytes: Byte1Byte2Byte3. Byte1 represents the hardware type, Byte2 represents the hardware error, and Byte3 represents the software error.
  3. If Byte2 is not equal to 0, it indicates a hardware error.
  4. If Byte2 is equal to 0 and Byte3 is not equal to 0, it signifies a software error.
 Example: If a C interface method returns 196609, convert it to the hexadecimal value 30001. Here, Byte1 is 3, Byte2 is 00 (no hardware error), and Byte3 is 01 (software error). As Byte3 is 0x01, refer to the Software Error table, where 1 means "Operation not permitted."
  1. If the absolute value is between 250 and 255, the error originates from the JNI source code. Refer to the above Common Error Code List for details.
  2. For any other values, please send a log to WizarPOS.

Hardware Type (Byte1)

  • 1: PINPAD

Hardware Error (Byte2)

MSR

Code Description
0x00 success
0x01 General error
0x40 Mismatch in the field of STX
0x41 Mismatch in the field of class
0x42 Mismatch in the field of function
0x43 Mismatch in the field of length
0x44 Mismatch in the field of ETX
0x45 Mismatch in the field of LRC
0x46 Mismatch in the field of MODE
0x51 Preamble error in card read data
0x52 Postamble error in card read data
0x53 LRC error in card read data
0x54 Parity error in card read data
0x55 Blank track
0x61 STX/ETX error in command communication
0x62 Class/Function un-recognizable in command
0x63 BCC error in command communication
0x64 Length error in command communication
0x65 No data available to re-read
0x71 No more space available for OPT write
0x72 OTP write try without data
0x73 CRC error in read data from OTP
0x74 No data stored in OTP

SmartCard Reader

Code Description
0x00 success
0x01 CMD_FAILED
0x10 AU9540_MSG_TYPE_NOT_MATCH
0x11 AU9540_MSG_SLOT_NOT_MATCH
0x12 AU9540_MSG_SEQ_NOT_MATCH
0x13 AU9540_MSG_NEED_MORE_WAIT_TIME
0x6A timeout during a Rx
0xF4 PROCEDURE_BYTE_CONFLICT
0xF6 ICC_PROTOCOL_NOT_SUPPORTED
0xF7 BAD_ATR_TCK
0xF8 BAD_ATR_TS
0xFB An all inclusive hardware error occurred
0xFD Parity error while talking to the ICC
0xFE timed out while talking to the ICC
0xFF Host aborted the current activity

PINPAD

Code Description
0x00 success
0x11 access denied
0x12 wrong command id
0x13 wrong package length
0x14 user cancel
0x15 wrong length of field
0x20 no key in this sector
0x21 out of range of pin length
0x22 failed in authentication
0x23 wrong length of key
0x24 wrong check value of session key
0x25 failed in writing flash
0x26 failed in reading flash
0x27 no key in this field
0x28 input is out legal range
0x29 failed in checking integrity
0x2A failed in encrypting using aes key text
0x2B failed in decrypting using aes key
0x2C break rules about data sensitivity
0x2D failed in the process of calculating mac
0x2E data length is not aligned

Software Error (Byte3)

Code(Hex) Code(Decimal) Description
0x01 1 Operation not permitted
0x02 2 No such file or directory
0x03 3 No such process
0x04 4 Interrupted system call
0x05 5 I/O error
0x06 6 No such device or address
0x07 7 Arg list too long
0x08 8 Exec format error
0x09 9 Bad file number
0x0A 10 No child processes
0x0B 11 Try again
0x0C 12 Out of memory
0x0D 13 Permission denied
0x0E 14 Bad address
0x0F 15 Block device required
0x10 16 Device or resource busy
0x11 17 File exists
0x12 18 Cross-device link
0x13 19 No such device
0x14 20 Not a directory
0x15 21 Is a directory
0x16 22 Invalid argument
0x17 23 File table overflow
0x18 24 Too many open files
0x19 25 Not a typewriter
0x1A 26 Text file busy
0x1B 27 File too large
0x1C 28 No space left on device
0x1D 29 Illegal seek
0x1E 30 Read-only file system
0x1F 31 Too many links
0x20 32 Broken pipe
0x21 33 Math argument out of domain of func
0x22 34 Math result not representable
0x23 35 Resource deadlock would occur
0x24 36 File name too long
0x25 37 No record locks available
0x26 38 Function not implemented
0x27 39 Directory not empty
0x28 40 Too many symbolic links encountered
0x29 41 Operation would block
0x2A 42 No message of desired type
0x2B 43 Identifier removed
0x2C 44 Channel number out of range
0x2D 45 Level 2 not synchronized
0x2E 46 Level 3 halted
0x2F 47 Level 3 reset
0x30 48 Link number out of range
0x31 49 Protocol driver not attached
0x32 50 No CSI structure available
0x33 51 Level 2 halted
0x34 52 Invalid exchange
0x35 53 Invalid request descriptor
0x36 54 Exchange full
0x37 55 No anode
0x38 56 Invalid request code
0x39 57 Invalid slot
0x3A 58 EDEADLK
0x3B 59 Bad font file format
0x3C 60 Device not a stream
0x3D 61 No data available
0x3E 62 Timer expired
0x3F 63 Out of streams resources
0x40 64 Machine is not on the network
0x41 65 Package not installed
0x42 66 Object is remote
0x43 67 Link has been severed
0x44 68 Advertise error
0x45 69 Srmount error
0x46 70 Communication error on send
0x47 71 Protocol error
0x48 72 Multihop attempted
0x49 73 RFS specific error
0x4A 74 Not a data message
0x4B 75 Value too large for defined data type
0x4C 76 Name not unique on network
0x4D 77 File descriptor in bad state
0x4E 78 Remote address changed
0x4F 79 Can not access a needed shared library
0x50 80 Accessing a corrupted shared library
0x51 81 .lib section in a.out corrupted
0x52 82 Attempting to link in too many shared libraries
0x53 83 Cannot exec a shared library directly
0x54 84 Illegal byte sequence
0x55 85 Interrupted system call should be restarted
0x56 86 Streams pipe error
0x57 87 Too many users
0x58 88 Socket operation on non-socket
0x59 89 Destination address required
0x5A 90 Message too long
0x5B 91 Protocol wrong type for socket
0x5C 92 Protocol not available
0x5D 93 Protocol not supported
0x5E 94 Socket type not supported
0x5F 95 Operation not supported on transport endpoint
0x60 96 Protocol family not supported
0x61 97 Address family not supported by protocol
0x62 98 Address already in use
0x63 99 Cannot assign requested address
0x64 100 Network is down
0x65 101 Network is unreachable
0x66 102 Network dropped connection because of reset
0x67 103 Software caused connection abort
0x68 104 Connection reset by peer
0x69 105 No buffer space available
0x6A 106 Transport endpoint is already connected
0x6B 107 Transport endpoint is not connected
0x6C 108 Cannot send after transport endpoint shutdown
0x6D 109 Too many references: cannot splice
0x6E 110 Connection timed out
0x6F 111 Connection refused
0x70 112 Host is down
0x71 113 No route to host
0x72 114 Operation already in progress
0x73 115 Operation now in progress
0x74 116 Stale NFS file handle
0x75 117 Structure needs cleaning
0x76 118 Not a XENIX named type file
0x77 119 No XENIX semaphores available
0x78 120 Is a named type file
0x79 121 Remote I/O error
0x7A 122 Quota exceeded
0x7B 123 No medium found
0x7C 124 Wrong medium type
0x8c 140 X509_VERIFY_FAIL
0x8e 142 X509_VERIFY_ERR_UNABLE_TO_GET_ISSUER_CERT
0x8f 143 X509_VERIFY_ERR_UNABLE_TO_GET_CRL
0x90 144 X509_VERIFY_ERR_UNABLE_TO_DECRYPT_CERT_SIGNATURE
0x91 145 X509_VERIFY_ERR_UNABLE_TO_DECRYPT_CRL_SIGNATURE
0x92 146 X509_VERIFY_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY
0x93 147 X509_VERIFY_ERR_CERT_SIGNATURE_FAILURE
0x94 148 X509_VERIFY_ERR_CRL_SIGNATURE_FAILURE
0x95 149 X509_VERIFY_ERR_CERT_NOT_YET_VERIFYALID
0x96 150 X509_VERIFY_ERR_CERT_HAS_EXPIRED
0x97 151 X509_VERIFY_ERR_CRL_NOT_YET_VERIFYALID
0x98 152 X509_VERIFY_ERR_CRL_HAS_EXPIRED
0x99 153 X509_VERIFY_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD
0x9a 154 X509_VERIFY_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD
0x9b 155 X509_VERIFY_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD
0x9c 156 X509_VERIFY_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD
0x9d 157 X509_VERIFY_ERR_OUT_OF_MEM
0x9e 158 X509_VERIFY_ERR_DEPTH_ZERO_SELF_SIGNED_CERT
0x9f 159 X509_VERIFY_ERR_SELF_SIGNED_CERT_IN_CHAIN
0xa0 160 X509_VERIFY_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY
0xa1 161 X509_VERIFY_ERR_UNABLE_TO_VERIFYERIFY_LEAF_SIGNATURE
0xa2 162 X509_VERIFY_ERR_CERT_CHAIN_TOO_LONG
0xa3 163 X509_VERIFY_ERR_CERT_REVOKED
0xa4 164 X509_VERIFY_ERR_INVALID_CA
0xa5 165 X509_VERIFY_ERR_PATH_LENGTH_EXCEEDED
0xa6 166 X509_VERIFY_ERR_INVALID_PURPOSE
0xa7 167 X509_VERIFY_ERR_CERT_UNTRUSTED
0xa8 168 X509_VERIFY_ERR_CERT_REJECTED
0xa9 169 X509_VERIFY_ERR_SUBJECT_ISSUER_MISMATCH
0xaa 170 X509_VERIFY_ERR_AKID_SKID_MISMATCH
0xab 171 X509_VERIFY_ERR_AKID_ISSUER_SERIAL_MISMATCH
0xac 172 X509_VERIFY_ERR_KEYUSAGE_NO_CERTSIGN
0xad 173 X509_VERIFY_ERR_UNABLE_TO_GET_CRL_ISSUER
0xae 174 X509_VERIFY_ERR_UNHANDLED_CRITICAL_EXTENSION
0xaf 175 X509_VERIFY_ERR_KEYUSAGE_NO_CRL_SIGN
0xb0 176 X509_VERIFY_ERR_UNHANDLED_CRITICAL_CRL_EXTENSION
0xb1 177 X509_VERIFY_ERR_INVALID_NON_CA
0xb2 178 X509_VERIFY_ERR_PROXY_PATH_LENGTH_EXCEEDED
0xb3 179 X509_VERIFY_ERR_KEYUSAGE_NO_DIGITAL_SIGNATURE
0xb4 180 X509_VERIFY_ERR_PROXY_CERTIFICATES_NOT_ALLOWED
0xb5 181 X509_VERIFY_ERR_INVALID_EXTENSION
0xb6 182 X509_VERIFY_ERR_INVALID_POLICY_EXTENSION
0xb7 183 X509_VERIFY_ERR_NO_EXPLICIT_POLICY
0xb8 184 X509_VERIFY_ERR_DIFFERENT_CRL_SCOPE
0xb9 185 X509_VERIFY_ERR_UNSUPPORTED_EXTENSION_FEATURE
0xba 186 X509_VERIFY_ERR_UNNESTED_RESOURCE
0xbb 187 X509_VERIFY_ERR_PERMITTED_VERIFYIOLATION
0xbc 188 X509_VERIFY_ERR_EXCLUDED_VERIFYIOLATION
0xbd 189 X509_VERIFY_ERR_SUBTREE_MINMAX
0xbe 190 X509_VERIFY_ERR_APPLICATION_VERIFYERIFICATION
0xbf 191 X509_VERIFY_ERR_UNSUPPORTED_CONSTRAINT_TYPE
0xc0 192 X509_VERIFY_ERR_UNSUPPORTED_CONSTRAINT_SYNTAX
0xc1 193 X509_VERIFY_ERR_UNSUPPORTED_NAME_SYNTAX
0xc2 194 X509_VERIFY_ERR_CRL_PATH_VERIFYALIDATION_ERROR
0xc3 195 X509_VERIFY_ERR_KEYUSAGE_NOT_MATCH
0xc8 200 COMMON_ERR_GENERAL
0xc9 201 COMMON_ERR_INVALID_ARG
0xca 202 COMMON_ERR_TIME_OUT
0xcb 203 COMMON_ERR_OVERFLOW
0xcc 204 COMMON_ERR_NO_MEM
0xcd 205 COMMON_ERR_WRITE
0xce 206 COMMON_ERR_READ
0xcf 207 COMMON_ERR_NO_DATA
0xd0 208 COMMON_ERR_INVALID_HANDLE
0xd1 209 COMMON_ERR_NO_DEVICE
Retrieved from "http://sdkwiki.wizarpos.com/index.php?title=Error_code&oldid=3372"